Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Mid-tower case with black steel panels and wood front accent, non-transparent side panel

ASUS

ASUS ProArt PA401 Woodcraft & Iron Rhythm Edition PC Case

SKU CH-CGAT-DY7S5

Mid-tower chassis for ATX, Micro-ATX or Mini-ITX builds with wood accents, 34 mm cable routing and pre-installed PWM fans

  • Motherboard CompatibilityATX Micro-ATX Mini-ITX
  • ColorBlack
  • Case MaterialSteel, ABS plastic, wood
  • With Power SupplyNo
  • Front Ports2 x USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2x2 (Type-C) 1 x
  • Spacious cable routing with 34 mm depth behind the tray
  • Front I/O includes USB 3.2 Gen 2x2 Type-C for fast peripherals
  • Supports ATX, Micro-ATX and Mini-ITX motherboards in one frame
  • Pre-installed 160 mm front fans and 120 mm rear fan move air quietly
  • Steel, ABS and wood construction gives a rigid, non-transparent chassis

Distinctive Mid-Tower for Creative Builds

The ASUS ProArt PA401 Woodcraft & Iron Rhythm Edition is a mid-tower chassis built from steel, ABS plastic and wood panels. It accepts ATX, Micro-ATX and Mini-ITX motherboards and ships in new condition. The left-side panel uses a latch for quick access, while the non-transparent exterior suits studios that prefer a subdued look.

Two Vertical Slots Limit Multi-Card Setups

Only two vertical expansion slots are provided, so the case fits a single graphics card up to 315 mm long. CPU coolers up to 160 mm tall are supported and the power supply bay accommodates units up to 170 mm deep. Builders who need a second card or a longer GPU must choose a different enclosure.

Pre-Installed PWM Fans and Flexible Drive Layout

Two 160 mm PWM fans at the front and one 120 mm PWM fan at the rear come fitted, with an expansion hub that supports five PWM fans in total. Drive bays can be configured as one 3.5-inch plus three 2.5-inch, three 3.5-inch, two 3.5-inch plus two 2.5-inch or four 2.5-inch drives. Removable dust filters cover the front and bottom intakes and 34 mm of cable-management space eases routing.

Poudarki

  • Spacious cable routing with 34 mm depth behind the tray
  • Front I/O includes USB 3.2 Gen 2x2 Type-C for fast peripherals
  • Supports ATX, Micro-ATX and Mini-ITX motherboards in one frame
  • Pre-installed 160 mm front fans and 120 mm rear fan move air quietly
  • Steel, ABS and wood construction gives a rigid, non-transparent chassis

Specifikacije

Motherboard CompatibilityATX
Micro-ATX
Mini-ITX
ColorBlack
Case MaterialSteel, ABS plastic, wood
With Power SupplyNo
Front Ports2 x USB 3.2 Gen 1 (Type-A)
1 × USB 3.2 Gen 2x2 (Type-C)
1 x Headphone + Microphone

Vprašanja o tem izdelku

How much room does the 34 mm cable-management channel actually leave behind the motherboard tray for routing thick power cables?

The 34 mm space accommodates standard 24-pin ATX and EPS cables with room for zip-ties, keeping the main chamber tidy and airflow clear.

What real-world throughput does the front USB 3.2 Gen 2x2 Type-C port deliver when connected to a compatible motherboard header?

The port supports up to 20 Gbps, limited by the motherboard's USB 3.2 Gen 2x2 header and the attached device's own speed rating.

Will a 315 mm graphics card fit alongside the two pre-installed 160 mm front fans without removing them?

Yes, the 315 mm GPU clearance is measured with the front 160 mm fans in place, so full-length cards install without fan relocation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.