Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black memory chips and gold edge connector

Brute Networks

Brute Networks A9652462-BN 8GB DDR4 2400 ECC UDIMM

SKU CH-FPJM-MW2V7

8GB DDR4-2400 ECC UDIMM with CL15 latency and 1.2V operation for Dell-compatible server upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnregistered
  • 8GB DDR4-2400 capacity expands server memory headroom
  • ECC protection detects and corrects single-bit data errors
  • 2V low-voltage operation reduces power draw per module
  • CL15 latency at 2400MHz delivers responsive throughput
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Dell-Compatible Server Memory Upgrade

This 8GB DDR4 module is built for servers and workstations that require Dell part number A9652462 compatibility. It runs at 2400MHz with a CL15 latency and 1.20V operating voltage. The unbuffered ECC design provides error correction for data integrity in mission-critical environments. Modules use major-brand chips from Samsung, SK Hynix or Micron.

Suited for Single-Module Expansion

This module fits administrators adding capacity to an existing Dell system that accepts unregistered ECC UDIMMs. Buyers needing registered or load-reduced DIMMs for multi-socket servers should look elsewhere. Systems limited to lower-density ranks or non-ECC memory will not support this part. It is sold as a single 8GB stick rather than a matched kit.

Integrates Into Existing DDR4 Slots

The UDIMM installs directly into standard DDR4 DIMM slots without requiring buffered memory infrastructure. Its 1.2V operation matches the platform's native voltage for straightforward compatibility. Using this module frees budget compared to OEM-labelled equivalents while maintaining the same chip-level specifications. Orders are filled with identically matched modules to avoid mixing revisions.

Poudarki

  • 8GB DDR4-2400 capacity expands server memory headroom
  • ECC protection detects and corrects single-bit data errors
  • 2V low-voltage operation reduces power draw per module
  • CL15 latency at 2400MHz delivers responsive throughput
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Specifikacije

BrandDell
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
ChipsetMajor Brand Chipset

Vprašanja o tem izdelku

My motherboard only has standard 288-pin DDR4 slots — will this 1.2 V unregistered ECC UDIMM fit without a registered DIMM slot?

Yes, the module is an unregistered 288-pin DDR4 UDIMM that installs in any standard DDR4 slot supporting ECC.

I still have CL15 DDR4-2400 sticks — will mixing them with this CL15 1.2 V module cause timing conflicts?

Identical speed, voltage and CAS latency mean the memory controller can run both kits at the same timings.

After installation, how can I confirm the module is running at PC4-19200 with ECC active?

Check BIOS or an OS tool such as dmidecode — it should report 2400 MT/s, 1.2 V and ECC enabled.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.