Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two green DDR3 DIMM sticks in anti-static bag

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3 1600MHz CL11 memory upgrade for HP ProDesk 600 G1

SKU CH-XZ8N-TXMVF

16 GB dual-channel DDR3 kit (2 × 8 GB, 1600 MHz, CL11) validated for HP ProDesk 600 G1 SFF and Tower systems

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 16 GB total capacity in a matched 2 x 8 GB kit
  • DDR3 1600 MHz speed rated at PC3 12800 for responsive performance
  • CL11 CAS latency with 11-11-11 timing for stable operation
  • Unbuffered non-ECC 240-pin DIMM design fits HP ProDesk 600 G1 SFF and Tower
  • Guaranteed compatibility backed by Computer Memory Solutions lifetime warranty

Targeted upgrade for HP ProDesk 600 G1

This 16GB kit contains two 8GB DDR3 1600MHz DIMMs built to the 240-pin standard. It is designed for owners of the HP ProDesk 600 G1 SFF or Tower who want to reach the platform's 32GB maximum without compatibility guesswork.

Replaces slower DDR3 1066 or 1333 modules

The ProDesk 600 G1 memory bus runs at 1066MHz per HP documentation, so faster sticks will downclock. The jump is worth it when your workload needs more than 8GB total and you want matched 2Rx8 pairs for dual-channel operation.

Simple two-stick installation in matched slots

Install the pair in like-coloured sockets to activate dual-channel mode; the system has four slots and modules may be added one at a time. A 32-bit operating system will limit usable capacity to roughly 3.5GB, so a 64-bit OS is required for the full 16GB.

Poudarki

  • 16 GB total capacity in a matched 2 x 8 GB kit
  • DDR3 1600 MHz speed rated at PC3 12800 for responsive performance
  • CL11 CAS latency with 11-11-11 timing for stable operation
  • Unbuffered non-ECC 240-pin DIMM design fits HP ProDesk 600 G1 SFF and Tower
  • Guaranteed compatibility backed by Computer Memory Solutions lifetime warranty

Specifikacije

BrandComputer Memory Solutions
ModelCM10246412800DIMM
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Prodesk 600 G1 Series Sff/Tower
Package Content2 Memory RAM Sticks

Vprašanja o tem izdelku

Will these 240-pin DDR3 DIMMs fit the four memory slots in my HP ProDesk 600 G1 SFF or Tower?

Yes — the kit contains two 240-pin DDR3 modules and the ProDesk 600 G1 provides four DIMM sockets, so they install directly into any free slots.

Do I need to populate the slots in matched pairs to enable dual-channel operation on the ProDesk 600 G1?

HP documentation states modules must be added in like pairs to take advantage of dual-channel support; install the two 8 GB sticks together in the same-coloured slots.

What is the maximum memory the ProDesk 600 G1 can recognise after I add this 16 GB kit?

The system supports up to 32 GB total; with this 16 GB kit installed you can add another matched 16 GB pair later to reach the limit.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.