Computer Memory Solutions
Computer Memory Solutions 2x16GB DDR5 4800MHz CL40 2Rx8 1.1V DIMM
DDR5 dual-channel kit with two 16 GB modules at 4800 MHz, CL40 timing and 1.1 V operation
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- CAS Latency40
- Timing40-40-40-96
- Voltage1.1V
- ECCNo
- Matched 2-piece kit simplifies dual-channel installation
- DDR5 4800 MT/s speed supports modern platform throughput
- CL40 40-40-40-96 timings deliver rated latency
- 1 V operation reduces memory power draw
- 288-pin DIMM fits standard desktop DDR5 slots
Kit composition and purpose
This kit contains two 16GB DDR5 modules rated at 4800MHz with CL40 timings and 1.1V operation. It is intended for desktop systems that accept 288-pin unbuffered non-ECC DIMMs and need a matched pair for dual-channel operation.
Who should consider this and who should not
Builders upgrading a platform that supports DDR5-4800 and wants a factory-matched 2Rx8 kit will find this suitable. Buyers whose motherboards require ECC, registered modules, or a different DDR generation cannot use these DIMMs.
Deciding specification
The modules run at DDR5-4800 (PC5-38400) with a CAS latency of 40 and a timing string of 40-40-40-96 at 1.1V; if your CPU or board cannot operate at this speed and voltage combination, the memory will not perform as specified.
Poudarki
- Matched 2-piece kit simplifies dual-channel installation
- DDR5 4800 MT/s speed supports modern platform throughput
- CL40 40-40-40-96 timings deliver rated latency
- 1 V operation reduces memory power draw
- 288-pin DIMM fits standard desktop DDR5 slots
Specifikacije
| Part Number | CM2048644800DIMM |
|---|---|
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Timing | 40-40-40-96 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Vprašanja o tem izdelku
Will the 1.1 V DDR5 modules run hot or draw extra power if I leave the system on all day?
The kit is rated at 1.1 V with standard DDR5 timings; it operates at the normal voltage for DDR5-4800 and does not require additional cooling beyond typical case airflow.
My motherboard has 288-pin DDR5 slots — is that the only thing I need to install this 2x16 GB kit?
Yes, the modules are 288-pin non-ECC unbuffered DIMMs; a 64-bit operating system is also required to use more than 4 GB of memory.
If I keep my existing DDR5 modules and add this 4800 MHz CL40 kit, what speed will the memory run at?
All installed memory will run at the slowest performance of the modules or the CPU capability, so mixing speeds or timings will drop everything to the lowest common setting.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



