Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3-1333 CL9 240-Pin Memory Upgrade
Two 4 GB DDR3-1333 CL9 DIMMs upgrade compatible Gateway DX4870 desktops to 8 GB
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 8 GB total capacity from two 4 GB modules
- DDR3-1333 speed with CL9 latency for responsive performance
- 5 V unbuffered non-ECC design matches system requirements
- Guaranteed compatibility with Gateway DX4870 desktops
- 240-pin DIMM form factor installs directly into motherboard slots
8GB DDR3-1333 kit for Gateway DX4870
This 8GB kit contains two 4GB unbuffered DDR3 DIMMs rated at 1333 MHz with CL9 timings. It is built specifically for the Gateway Desktop DX4870 series including the UB21P, UB20P and UR11P models. The modules run at 1.5 V and use major-brand chips without heat spreaders.
Suits owners restoring
Buyers needing ECC, registered modules or speeds above DDR3-1333 should look elsewhere. The kit is not compatible with laptops, 204-pin SO-DIMM slots or systems limited to lower-density memory. It also does not support quad-channel architectures or voltages below 1.5 V.
Provides 8 GB across two slots
The motherboard accepts up to 16 GB across four sockets, so this kit leaves two slots free for future expansion. It handles everyday multitasking, office applications and light media playback comfortably. Heavy virtualization, large database workloads or modern gaming will exceed the 8 GB capacity and the DDR3-1333 bandwidth ceiling.
Poudarki
- 8 GB total capacity from two 4 GB modules
- DDR3-1333 speed with CL9 latency for responsive performance
- 5 V unbuffered non-ECC design matches system requirements
- Guaranteed compatibility with Gateway DX4870 desktops
- 240-pin DIMM form factor installs directly into motherboard slots
Specifikacije
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gateway Desktop Dx4870-Ub21P, Dx4870-Ub20P Dx4870-Ur11P |
| Package Content | 2 Memory RAM Sticks |
Vprašanja o tem izdelku
Does this 240-pin DDR3 kit need a motherboard with four slots to reach the 16 GB maximum on my Gateway DX4870?
The kit contains two 4 GB modules for 8 GB total. Your DX4870 has four slots and supports up to 16 GB, so you can add another identical kit later to fill all four slots.
Will these CL9 1.5 V modules run stably if my Gateway desktop already has CL11 DDR3 installed?
The board will run all modules at the slowest common speed and loosest timings. Mixing CL9 with CL11 means both sets operate at CL11, which is stable but does not use the lower latency of this kit.
How can I confirm the system recognises both 4 GB sticks at 1333 MHz after installation?
Open Task Manager, go to the Performance tab, select Memory and verify the speed reads 1333 MHz and total capacity shows 8 GB. CPU-Z SPD tab will also list each module as PC3-10600 CL9.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



