Computer Memory Solutions
Computer Memory Solutions CM2048642400SO 32GB (2x16GB) DDR4 2400 SODIMM memory upgrade
32 GB dual-channel DDR4 SODIMM kit at 2400 MHz for HP EliteOne all-in-one desktops
- Capacity32GB (2 x 16GB)
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 32 GB total capacity from two 16 GB modules
- DDR4 2400 speed rated at PC4 19200
- Low 1.2 V operation reduces power draw
- CL17 CAS latency for responsive timing
- Guaranteed fit for HP EliteOne 1000 G1 and 800 G2/G3 All-in-One systems
32GB DDR4 SO-DIMM kit for HP EliteOne All-in-One
This 32GB kit contains two 16GB DDR4 2400 SO-DIMM modules built for HP EliteOne 1000 G1, 800 G2 and 800 G3 All-in-One desktops. It targets owners of those specific systems who need the maximum supported memory. The modules are non-ECC, unbuffered and run at 1.2V. They are not suited for servers, workstations requiring ECC, or laptops that use a different pin count.
Straightforward two-slot installation
Each stick uses the standard 260-pin SO-DIMM form factor, so it seats in the two available slots without tools. Because the kit supplies a matched pair, the memory controller can run in dual-channel mode automatically. The main risk is mixing these modules with existing sticks of a different speed or rank, which can force the system to run at the lowest common settings or fail to boot.
Fills both slots for 32GB total at DDR4 2400 CL17
The kit provides 32GB across two ranks per module, reaching the platform's documented maximum capacity. At DDR4 2400 with CL17 timings it delivers the rated bandwidth for everyday workloads and multi-tasking. Headroom ends at the two-slot limit; systems needing more than 32GB or faster transfer rates cannot use this kit.
Poudarki
- 32 GB total capacity from two 16 GB modules
- DDR4 2400 speed rated at PC4 19200
- Low 1.2 V operation reduces power draw
- CL17 CAS latency for responsive timing
- Guaranteed fit for HP EliteOne 1000 G1 and 800 G2/G3 All-in-One systems
Specifikacije
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400SO |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq EliteOne 1000 G1 All-in-One, 800 G2 All-in-One Desktop, 800 G3 All-in-One |
| Package Content | 2 Memory RAM Sticks |
Vprašanja o tem izdelku
How do I confirm the kit runs at DDR4 2400 CL17 after installing it in my EliteOne 800 G3 All-in-One?
Boot the system and open Task Manager or a hardware monitor; the memory tab should show 32 GB total, 2400 MT/s speed and 17-17-17 timings at 1.2 V.
What exactly ships in the box and is anything else required for the upgrade?
The package contains two 16 GB 260-pin DDR4 SO-DIMM modules; no extra cables, brackets or tools are needed for the EliteOne All-in-One slots.
Should I choose the 32 GB (2 x 16 GB) kit or a smaller capacity for my EliteOne 1000 G1?
The 32 GB kit fills both SO-DIMM sockets and matches the platform maximum of 32 GB; select it if you want the full supported capacity.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



