Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Four green 184-pin DDR ECC registered DIMMs, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM256722100ERDIMM 8GB (4 x 2GB) DDR 266 ECC Registered memory upgrade

SKU CH-C6DW-0M9HA

8GB kit of four 2GB DDR 266 ECC registered 184-pin DIMMs for Sun Blade 1500 and 2500 servers

  • Capacity8GB (4 x 2GB)
  • Type184-Pin DDR SDRAM
  • SpeedDDR 266 (PC 2100)
  • CAS LatencyCL2
  • Timing2-2-2
  • Voltage2.5V
  • ECC protection guards data integrity on Sun Blade servers
  • Registered DDR 266 modules deliver stable 2100 MT/s throughput
  • 184-pin DIMMs install directly in Blade 1500 and 2500 slots
  • Four 2 GB sticks populate all channels for 8 GB total
  • 5 V CL2 timing meets original Sun Blade specifications

8GB Registered DDR Kit for Sun Blade

This 8GB kit from Computer Memory Solutions contains four 2GB registered DIMMs built for Sun Blade 1500, 2500, Sx1500 and Sx2500 servers. Each module uses a 184-pin DDR interface and includes ECC for data integrity. The kit is sold new and guaranteed compatible with the listed models.

Suitable for Sun Blade upgrades.

The modules match the Sun Blade 1500, 2500, Sx1500 and Sx2500 specifications, so they serve administrators restoring or expanding those systems. Builders working with any other workstation or server platform should look elsewhere because the pin layout, voltage and registration are specific to the listed Sun hardware.

184-pin DDR 266 registered ECC specification

The decisive specification is the 184-pin DDR 266 registered ECC design with 2.5V operation and CL2 timing. Only systems that accept this exact module type can use the kit, so verify the server documentation before ordering.

Poudarki

  • ECC protection guards data integrity on Sun Blade servers
  • Registered DDR 266 modules deliver stable 2100 MT/s throughput
  • 184-pin DIMMs install directly in Blade 1500 and 2500 slots
  • Four 2 GB sticks populate all channels for 8 GB total
  • 5 V CL2 timing meets original Sun Blade specifications

Specifikacije

BrandComputer Memory Solutions
ModelCM256722100ERDIMM
Capacity8GB (4 x 2GB)
Type184-Pin DDR SDRAM
SpeedDDR 266 (PC 2100)
CAS LatencyCL2
Timing2-2-2
Voltage2.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSun Blade 1500, 2500, Sx1500, Sx2500
Package Content4 Memory RAM Sticks

Vprašanja o tem izdelku

Does the PC2100 rating limit bandwidth on a Sun Blade 2500?

The kit runs at DDR 266 (PC 2100), so the memory bus is capped at 266 MHz per module.

Will the 184-pin DIMMs fit the Sun Blade 1500 chassis?

Yes, each stick is a 184-pin DDR SDRAM DIMM, the form factor used by the Blade 1500 and 2500 series.

What is the correct order to install the four 2 GB registered DIMMs?

Populate the lowest-numbered sockets first; registered DIMMs must fill bank 0 before bank 1 to avoid a POST hang.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.