Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two black low-profile DDR4 modules with anodized aluminium heatspreaders

Corsair

Corsair Vengeance LPX CMK16GX4M2A2400C14 16GB DDR4 2400 CL14 desktop RAM

SKU CH-5R88-J63EQ MPN CMK16GX4M2A2400C14

A 16 GB dual-channel DDR4 kit running at 2400 MT/s with CL14 timings and a low-profile aluminum heatspreader

  • Low latency CL14 for responsive system performance
  • 16 GB dual-channel kit enables smooth multitasking
  • XMP 2.0 support simplifies automatic overclocking setup
  • Anodized aluminium heatspreader improves thermal dissipation
  • Low-profile 288-pin design fits compact builds

Capacity and configuration

This kit provides 16GB of DDR4 memory in a matched pair of 8GB modules. It runs at 2400 speed with a CAS latency of 14 and timings of 14-16-16-31 at 1.20V. The 288-pin unbuffered DIMMs are built on an eight-layer PCB and use individually screened ICs for overclocking headroom. XMP 2.0 support enables automatic configuration.

Overclocking focus and clearance limits

Builders who want factory-tuned low-latency performance and easy XMP setup will find this kit straightforward. The low-profile anodized aluminum heatspreader fits tight spaces where taller modules cannot. Buyers who need ECC error correction or registered modules for server-grade stability should look elsewhere. Systems limited to lower DDR4 speeds or higher voltage requirements may not benefit from the rated specifications.

Heatspreader and PCB advantages

The pure aluminum heatspreader on each module improves heat dissipation for cooler operation during sustained loads. The eight-layer PCB further assists thermal management and contributes to the overclocking margin. Together these features help maintain stability when the memory runs at its rated 2400 speed with CL14 timings. No additional software or accessories are included beyond the memory modules themselves.

Poudarki

  • Low latency CL14 for responsive system performance
  • 16 GB dual-channel kit enables smooth multitasking
  • XMP 2.0 support simplifies automatic overclocking setup
  • Anodized aluminium heatspreader improves thermal dissipation
  • Low-profile 288-pin design fits compact builds

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Does this 288-pin DDR4 kit need a motherboard with an Intel X99 chipset to run at its rated 2400 speed?

The kit is optimized and compatibility tested for Intel X99 motherboards, but it will operate on any DDR4 platform that supports 2400 MT/s; XMP 2.0 handles the automatic configuration.

Will the low-profile heatspreader on these modules clear a large CPU air cooler that overhangs the first DIMM slot?

The Vengeance LPX height is carefully designed to fit smaller spaces, so it typically clears oversized coolers that block standard-height modules.

After enabling XMP 2.0 in the BIOS, how can I confirm the kit is running at CL14 14-16-16-31 timings and 1.20 V?

Check the memory tab in CPU-Z or the BIOS memory information screen; they will show the active frequency, timings, and voltage matching the kit specifications.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.