NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Crucial
16 GB DDR3 1600 ECC Registered module with CL11 latency and 1.50 V operation
This 16GB DDR3 1600 module delivers ECC Registered operation for server platforms that require error correction and signal buffering. The 2Rx4 organisation and CL11 latency support stable throughput in multi-channel configurations. It is built for administrators who need registered memory to populate high-capacity slots in compatible systems.
The jump is worthwhile when your motherboard mandates registered DIMMs and ECC protection for data integrity. Standard unbuffered or non-ECC modules will not function in these slots, so this kit enables the capacity and reliability the platform expects. It suits upgrades where registered memory is a hard requirement rather than an option.
Confirm the system accepts 240-pin DDR3 registered DIMMs at 1.50V and can address 16GB per slot with 2Rx4 density. The board must support quad-channel population rules for this kit to operate as intended. Without registered memory support, the modules will not post.
| Brand | Crucial |
|---|---|
| Model | CT204872BB160B |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Teža pošiljke | 0.06 kg |
| Velikost pošiljke | 178 × 122 × 13 mm |
The module uses the standard 240-pin DDR3 form factor and 1.50V voltage; verify your server accepts registered ECC DDR3 1600 before installing.
Power down the server, open the chassis, align the notch on the 240-pin edge connector with the slot key, press firmly until both retention clips click, then power on to confirm detection.
No routine maintenance is required; if a module fails, replace it with an identical 16GB DDR3 1600 CL11 registered ECC 2Rx4 DIMM to preserve quad-channel operation.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?