Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
White 120mm square frame fan with transparent blades, central ARGB ring and magnetic daisy-chain connectors on the corners

darkFlash

darkFlash G24 120mm PWM ARGB Case Fan White

SKU CH-P6YC-Y5GJY

A 120 mm PWM case fan with magnetic daisy-chain wiring, 5 V ARGB lighting and a hydro bearing spinning 800–2000 RPM for 50–55 CFM airflow at 30–35 dBA

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM800-2000 PRM

Color White

Quantity 1-Pack

Fan Direction Forward

  • Magnetic daisy-chain cuts cable clutter with patented 7-pin connectors
  • 5 V ARGB lights sync to motherboard RGB software across 16.8 million colours
  • PWM speed range 800-2000 RPM balances cooling and quiet running
  • FDB hydro bearing rated 40 000 hours MTTF plus eight vibration pads
  • Slim 120 × 120 × 25 mm frame fits most cases and radiators

Magnetic daisy-chain design

The darkFlash G24 is a 120 mm PWM ARGB case fan built around a patented 7-pin magnetic connector that lets multiple units snap together without extra cables. White frame and transparent blades suit clean, light-themed builds. A 4-pin PWM header gives motherboard speed control from 800 to 2000 RPM. Supplied splitter cable handles both PWM and 5 V ARGB signals for simple routing.

Hydro bearing and vibration pads

Fluid-dynamic bearing rated for 40000 hours MTTF keeps friction low across the speed range. Nine aerodynamic blades balance airflow and static pressure for case or radiator mounting. Eight anti-vibration pads (four large, four small) plus four screws isolate the 25 mm thick frame from chassis resonance. Noise stays between 30 and 35 dBA at full load.

5 V ARGB sync and practical limits

Four-corner and centre LEDs produce 16.8 million colours synced via ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion or ASRock Polychrome RGB. Only 5 V 3-pin ARGB headers are supported; 12 V RGB headers will damage the lighting. Maximum airflow reaches 50-55 CFM at 2000 RPM, so dense radiator stacks may need higher static-pressure models.

Poudarki

  • Magnetic daisy-chain cuts cable clutter with patented 7-pin connectors
  • 5 V ARGB lights sync to motherboard RGB software across 16.8 million colours
  • PWM speed range 800-2000 RPM balances cooling and quiet running
  • FDB hydro bearing rated 40 000 hours MTTF plus eight vibration pads
  • Slim 120 × 120 × 25 mm frame fits most cases and radiators

Specifikacije

BranddarkFlash
Part NumberG24
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800-2000 PRM
Air Flow50-55 CFM
Noise Level30 - 35 dBA
Power Connector4-pin PWM
ColorWhite
LEDARGB
FeaturesDreamy colorful ARGB lighting; Magnetic splice design; Aerodynamic blades; Magnetic wiring connector; FDB Hydro Bearing
Package Contents1 × Gauss?G24 ARGB Fan; 4 × Anti-vibration pads; 4 × Mounting screws; 1 × PWM/ARGB splitter cable; 1 × User manual

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What does the 4-pin PWM connector let the fan do between 800 and 2000 RPM?

The 4-pin PWM connector lets the motherboard automatically vary the fan speed from 800 to 2000 RPM based on system temperature, balancing cooling performance and quiet operation.

What physical space does the 120 × 120 × 25 mm frame need to fit?

The slim 120 × 120 × 25 mm frame fits most standard PC cases and liquid-cooling radiators, and the package includes four anti-vibration pads and four mounting screws for secure installation.

How do I connect several fans using the magnetic daisy-chain without a wiring mistake?

Snap the patented 7-pin magnetic connectors together to link fans in series, then plug the included PWM/ARGB splitter cable into a single 4-pin PWM header and a 5 V 3-pin ARGB header on the motherboard — do not use a 12 V RGB header.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.