DELL
DELL 1.92TB SAS 2.5" 12G MU enterprise SSD
A 1.92 TB SAS 12 Gbps 2.5" mixed-use enterprise SSD with a Dell caddy for R-series servers
- 92 TB capacity supports mixed workloads
- SAS 12 Gb/s interface delivers consistent throughput
- 5 inch form factor fits dense server bays
- Compatible Dell caddy enables direct installation in R-series servers
- Mixed-use endurance balances read and write performance
1.92 TB SAS enterprise SSD
This 1.92 TB SAS solid-state drive uses a 2.5 inch form factor and a 12 Gb/s interface. It is built for mixed-use workloads in Dell PowerEdge servers and ships with a compatible caddy for direct installation.
Suits mixed-use server workloads
The drive fits a long list of PowerEdge R-series models from the R210 through the R930, including the R220, R420, R620, R720 and R730XD. It is not intended for desktop PCs, consumer laptops or systems that lack a SAS backplane and the matching drive bay.
12 Gb/s SAS interface decides fit
The single specification that determines compatibility is the 12 Gb/s SAS connection; the server must provide that interface and a 2.5 inch bay. Without a SAS controller and the correct caddy the drive cannot be used.
Poudarki
- 92 TB capacity supports mixed workloads
- SAS 12 Gb/s interface delivers consistent throughput
- 5 inch form factor fits dense server bays
- Compatible Dell caddy enables direct installation in R-series servers
- Mixed-use endurance balances read and write performance
Specifikacije
Za ta izdelek še ni objavljenih specifikacij.
Vprašanja o tem izdelku
How do I install the 2.5" SAS SSD into a Dell R730 server and what step is often missed?
Slide the drive into the supplied caddy, secure the screws, then insert the assembly into a hot-swap bay until the latch clicks; the step often missed is fully engaging the latch so the SAS connector seats on the backplane.
What maintenance or replacement will the 1.92TB MU drive need over its service life?
As a mixed-use enterprise SSD it has no moving parts; monitor SMART wear indicators and replace the drive once the rated endurance is reached or if reallocated sectors rise sharply.
What limit appears first on the 12G SAS interface during sustained heavy writes?
The 12Gbps SAS link caps sequential throughput; under continuous mixed-use workloads the interface bandwidth saturates before the NAND write endurance becomes a bottleneck.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
