DELL
DELL 2TB 7.2K SAS 12G 2.5" internal hard drive
A 2 TB 2.5-inch SAS drive spinning at 7200 RPM with a 12 Gbps interface and 128 MB cache for server storage
- 2 TB capacity stores large datasets
- 7200 RPM spindle speeds up data access
- SAS 12 Gbps interface moves data quickly
- 128 MB cache smooths burst workloads
- 5 inch form factor fits dense servers
Dell 2TB SAS 12G Server Drive
This 2.5-inch internal hard drive provides 2000GB of storage with a 7200RPM rotational speed. It connects via a SAS 12Gbps interface and includes a 128MB buffer. The unit is a new, original Dell component identified by part numbers ST2000NX0273 and 1FM201-150.
Suited for SAS storage arrays and servers
This drive fits servers and storage arrays that accept 2.5-inch SAS drives running at 12Gbps. It is not for systems that only support 3.5-inch drive bays. It is not for builds requiring an interface other than SAS. It is not for users needing capacities beyond 2000GB.
Interface is SAS 12Gbps
The SAS 12Gbps interface determines compatibility with the host controller and backplane. Verify that the target system supports this specific interface speed and the 2.5-inch form factor before purchase.
Poudarki
- 2 TB capacity stores large datasets
- 7200 RPM spindle speeds up data access
- SAS 12 Gbps interface moves data quickly
- 128 MB cache smooths burst workloads
- 5 inch form factor fits dense servers
Specifikacije
Za ta izdelek še ni objavljenih specifikacij.
Vprašanja o tem izdelku
Will the 2.5" SAS 12Gbps interface work with my existing 6Gbps SAS backplane?
The drive uses a 12Gbps SAS interface that is backward compatible with 6Gbps SAS backplanes, so it will operate at the lower speed without any configuration changes.
How can I verify the 7200RPM drive is performing correctly after installation?
Check the system BIOS or RAID controller utility to confirm the drive is detected at 12Gbps link speed and shows the full 2000GB capacity, then run a SMART health scan for zero reallocated sectors.
Does the 1FM201-150 include a mounting bracket or caddy, or must I supply one?
The drive is supplied as a bare 2.5" SFF mechanism only; any hot-plug tray, caddy or mounting screws required for your specific server chassis must be purchased separately.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.



