Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Low-profile network adapter with single QSFP56 port

DELL

DELL Mellanox ConnectX-6 SP HDR100/200 QSFP56 LP Adapter

SKU CH-86EY-B67DZ

Single-port HDR100/200 QSFP56 low-profile adapter for Dell PowerEdge R650, R750, R760 and C6520 servers

  • TypeRack
  • Single-port HDR100/200 connectivity for high-throughput server links
  • QSFP56 interface supports 100 and 200 Gb/s InfiniBand speeds
  • Low-profile form factor fits dense Dell PowerEdge chassis
  • Validated across R650, R660, R750, R760 and C6520 platforms
  • Tested components with updated firmware ensure reliable deployment

Single-port HDR100/200 adapter

The DELL Mellanox ConnectX-6 SP HDR100/200 QSFP56 LP Adapter is a low-profile network card for Dell PowerEdge servers. It provides one QSFP56 port supporting HDR100 and HDR200 InfiniBand speeds. The card suits clusters needing high-throughput, low-latency fabric connectivity in a compact bracket. It fits 1U and dense compute nodes where full-height cards cannot be installed.

HDR100 and HDR200 headroom

A single port delivers 100 Gb/s or 200 Gb/s bandwidth for MPI traffic, storage fabrics and GPU-direct workloads. The adapter saturates one HDR link; multi-rail or multi-subnet designs need additional ports per node. Bandwidth scales linearly with each installed adapter, so total throughput depends on slot count and switch uplinks. Workloads requiring more than one concurrent HDR link per server will need extra adapters.

QSFP56 single-port constraint

The card exposes exactly one QSFP56 cage, so each server consumes one PCIe slot for one HDR link. Buyers needing two or more HDR ports per node must populate multiple slots or choose a dual-port model. Compatibility is limited to the listed PowerEdge C6520, C6525, C6615, C6620, R650, R650xs, R6515, R6525, R660, R660xs, R6615, R6625, R750, R750xa, R750xs, R7515, R7525, R760, R760xs, R7615, R7625 and XE8545 platforms.

Poudarki

  • Single-port HDR100/200 connectivity for high-throughput server links
  • QSFP56 interface supports 100 and 200 Gb/s InfiniBand speeds
  • Low-profile form factor fits dense Dell PowerEdge chassis
  • Validated across R650, R660, R750, R760 and C6520 platforms
  • Tested components with updated firmware ensure reliable deployment

Specifikacije

BrandDELL
Model540-BCNL, 540-BCMN
TypeRack

Vprašanja o tem izdelku

Will the ConnectX-6 SP HDR100/200 QSFP56 LP Adapter work with my existing Dell PowerEdge R750 server?

Yes, the adapter is listed as compatible with the Dell PowerEdge R750 among many other supported models.

How can I verify the adapter is operating correctly after installation?

The firmware has been updated and all components are tested; check the link status lights on the QSFP56 port and confirm the adapter appears in the server's PCIe device list.

Does the package include any cables or transceivers, or must I purchase them separately?

The listing describes the low-profile adapter only; QSFP56 cables or transceivers for HDR100/200 connectivity are not included and must be sourced separately.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.