Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Dell PowerEdge M630 blade server half-height chassis matte black finish

DELL

DELL PowerEdge M630 Blade 2x Xeon E5-2699v4 192GB DDR4 2x 1.8TB SAS

SKU CH-JFD9-8GS6P

Dual Xeon E5-2699v4 blade server with 192GB DDR4, two 1.8TB SAS drives and PERC H330 controller

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size192GB
  • Dual Xeon E5-2699 v4 processors provide 2.2 GHz performance
  • 192GB DDR4 ECC registered memory supports up to 512GB capacity
  • 2x 1.8TB SAS drives with PERC H330 RAID controller
  • iDRAC8 Enterprise enables remote server management
  • 10GbE 2-port 562T adapter delivers high-speed networking

Dell PowerEdge M630 blade server

This Dell PowerEdge M630 blade server carries two Xeon E5-2699 v4 processors at 2.2 GHz and 192 GB of DDR4 ECC registered memory. It ships with two 1.8 TB SAS hard drives and a PERC H330 RAID controller. Remote management is handled by iDRAC8 Enterprise and networking by a 10 GbE two-port 562T adapter. The unit is new and firmware is updated to the latest stable version.

Suited for dense compute clusters

This blade suits clusters that need high core counts and large memory capacity in a half-height form factor. It fits chassis that accept PowerEdge M630 blades and provides integrated 10 GbE connectivity. Buyers who need more than two internal drives should look at a different platform. Workloads requiring GPU acceleration will not be served by the integrated graphics.

Maximum memory capacity of 512 GB

The system supports up to 512 GB of DDR4 memory across its DIMM slots. The installed 192 GB leaves headroom for future expansion. If the target workload demands more than 512 GB, this blade cannot meet the requirement.

Poudarki

  • Dual Xeon E5-2699 v4 processors provide 2.2 GHz performance
  • 192GB DDR4 ECC registered memory supports up to 512GB capacity
  • 2x 1.8TB SAS drives with PERC H330 RAID controller
  • iDRAC8 Enterprise enables remote server management
  • 10GbE 2-port 562T adapter delivers high-speed networking

Specifikacije

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size192GB
Memory TypeDDR4 SDRAM
Max Memory Capacity512GB
Hard Drive (Installed)3,60
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 Enterprise
Dimensions22 x 22x 10 in
Weight20

Vprašanja o tem izdelku

Does this M630 blade require a Dell PowerEdge enclosure to operate?

The M630 is a blade form factor server that installs into a compatible Dell PowerEdge chassis; the chassis provides power, cooling and I/O connectivity.

Can the PERC H330 controller manage the two installed 1.8 TB SAS drives alongside older SAS drives I might add?

The PERC H330 supports SAS connectivity for the installed 1.8 TB drives and additional SAS devices; RAID configuration is managed through the controller BIOS or iDRAC8 Enterprise.

How can I verify both Xeon E5-2699 v4 processors and all 192 GB of DDR4 memory are recognised after installation?

During POST the system reports each CPU and the total memory; iDRAC8 Enterprise also displays processor count, core count and 192 GB DDR4 in the hardware inventory.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.