Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Slender black stainless-steel 3D printing pen with OLED screen, 1.4 cm diameter, 170 mm long, ceramic nozzle, weighs 41 g

DEWANG

DEWANG 3D Printing Pen OLED 1.75mm Black

SKU CH-B6X5-NFT8S

A stainless-steel 3D printing pen with OLED display, ceramic nozzle and six speed levels draws 1.75 mm PLA or ABS filament at up to 230 °C

  • Type3D Printing Pen
  • ColorBlack
  • Body MaterialStainless Steel
  • Filament Diameter1.75mm
  • Jets Diameter0.7mm
  • Max Working Speed6 Levels

Color Black

  • OLED screen shows precise temperature from 130 to 230 degrees
  • six speed levels let you match flow to any project
  • instant PLA/ABS switch without restarting the pen
  • ceramic nozzle and built-in fan cool filament fast for clean lines
  • slim 1.4 cm stainless-steel body weighs just 41 grams

What this pen is and who uses it

The DEWANG 3D Printing Pen is a handheld extrusion tool that melts 1.75mm PLA or ABS filament through a 0.7mm ceramic nozzle. An OLED screen shows the current temperature, which adjusts from 130 to 230 degrees by button. Six speed levels and a built-in fan let you draw free-standing lines in the air.

Who it suits and who should look elsewhere

Makers, students and hobbyists who want instant PLA/ABS switching without restarting the pen will appreciate the on-the-fly mode change. The slim 1.4cm stainless-steel body and 41g weight suit long drawing sessions. Buyers needing a full build-volume 3D printer or multi-material support should look elsewhere.

Capacity and headroom

The pen handles standard 1.75mm PLA at 190 degrees and ABS at 210 degrees, with a motor rated for 103 hours of continuous use. Three included 3-metre PLA spools provide starter filament. The fixed 0.7mm nozzle limits fine detail, and the DC 5V 2A input restricts operation to power banks, adapters or USB ports.

Poudarki

  • OLED screen shows precise temperature from 130 to 230 degrees
  • six speed levels let you match flow to any project
  • instant PLA/ABS switch without restarting the pen
  • ceramic nozzle and built-in fan cool filament fast for clean lines
  • slim 1.4 cm stainless-steel body weighs just 41 grams

Specifikacije

Type3D Printing Pen
ColorBlack
Body MaterialStainless Steel
Filament Diameter1.75mm
Jets Diameter0.7mm
Max Working Speed6 Levels
Operation TemperatureABS 210?, PLA 190?
Package Contents1 X 3D Printing Pen
1 X Power Adapter
1 X USB Cable
3 X 3 Meters PLA Filaments
1 X Screwdriver
1 X Manual
Dimensions170*14*14mm
Weight41g

Druge različice tega modela

še 3 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What power source does the DEWANG 3D Printing Pen require?

The pen runs on DC 5V 2A input and can be powered by the included USB cable from a power bank, computer USB port, or the supplied US-plug adapter.

Can I use the 1.75 mm PLA and ABS filaments I already have with this pen?

Yes — the pen accepts standard 1.75 mm PLA and ABS filament, and you can switch between the two materials at any time without restarting the device.

How do I confirm the pen is heating correctly after I turn it on?

The OLED screen shows the live nozzle temperature; when it reaches 190 °C for PLA or 210 °C for ABS the pen is ready to extrude.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.