Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver aluminium 2U server heatsink with embedded heatpipes and stacked fins

Dynatron

Dynatron A53 2U CPU cooler for AMD EPYC SP6

SKU CH-HXXM-P8HR1

A 2U air cooler with aluminium stacked fins and embedded heatpipes for AMD EPYC SP6 processors

  • Designed for AMD EPYC SP6 processors
  • 2U server height fits dense rack builds
  • Aluminium stacked fins with embedded heatpipes spread heat fast
  • Lightweight aluminium base eases mounting pressure
  • 53 mm fin height maximises airflow in tight chassis

Dynatron A53 2U SP6 cooler

The Dynatron A53 is a 2U aluminium stacked-fin heatsink with embedded heatpipes designed for AMD EPYC processors on the SP6 socket. It targets server builders and integrators who need reliable thermal performance within a two-rack-unit chassis height.

Replaces stock or lower-profile coolers

This cooler replaces basic heat sinks or lower-profile units when thermal headroom is required for sustained workloads in 2U or taller enclosures. The jump is worthwhile when the existing solution cannot maintain acceptable temperatures under continuous load.

Verify SP6 socket and 2U clearance

Confirm the motherboard uses the SP6 socket and that the chassis provides at least 2U of vertical space for the heatsink. Ensure mounting hole alignment matches the SP6 pattern and that airflow direction suits the system layout.

Poudarki

  • Designed for AMD EPYC SP6 processors
  • 2U server height fits dense rack builds
  • Aluminium stacked fins with embedded heatpipes spread heat fast
  • Lightweight aluminium base eases mounting pressure
  • 53 mm fin height maximises airflow in tight chassis

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Does the 2U height fit my rack chassis?

The cooler is built to a 2U profile so it fits standard 2U and taller server chassis.

How do I mount it on the SP6 socket and what step is often missed?

Align the heatsink with the SP6 mounting holes, secure the supplied brackets, then apply even pressure when tightening the screws to avoid uneven contact.

Will the aluminum fins or heatpipes need replacement later?

The aluminum stacked fins and embedded heatpipes are passive components with no moving parts, so they do not require scheduled replacement.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.