Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact 1U liquid cooler with five 40 mm 12000 rpm fans

Dynatron

Dynatron L25-1 All-in-One Liquid Cooler 1U 250W 5×40mm 12000rpm

SKU CH-M86H-99BRR

All-in-one liquid cooler for 1U servers with five 40 mm PWM fans at 12000 rpm, supporting Intel LGA115x, LGA2011 and LGA2066 plus AMD AM2, AM3, AM4.

  • Designed for 1U servers with 250 W heat dissipation
  • Five 40 mm PWM fans reach 12000 rpm for high airflow
  • Pre-applied Shin-Etsu 7762 compound ensures reliable thermal transfer
  • Compatible with Intel LGA115x, LGA2011, LGA2066 sockets
  • Supports AMD AM2, AM3, AM4, FM1, FM2 platforms

1U Server Liquid Cooler

The Dynatron L25-1 is an all-in-one liquid cooler built for 1U server chassis. It supports Intel LGA115x and LGA2011/2066 Square ILM sockets alongside AMD AM2, AM3, AM4, FM1 and FM2 platforms. The unit handles up to 250 Watts of heat dissipation for high-density deployments.

Installation and Clearance

Five 40 mm PWM fans mount directly to the radiator for a compact assembly that fits tight 1U spacing. Pre-printed Shin-Etsu 7762 thermal compound removes the need for manual paste application. Builders must verify motherboard keep-out zones and bracket alignment before securing the cold plate.

Sustained Load Behaviour

Under continuous load the five fans can spin to 12000 RPM to maintain coolant flow across the radiator. PWM control adjusts speed dynamically as thermal demand rises. The 250 W dissipation rating reflects steady-state capacity rather than a short burst figure.

Poudarki

  • Designed for 1U servers with 250 W heat dissipation
  • Five 40 mm PWM fans reach 12000 rpm for high airflow
  • Pre-applied Shin-Etsu 7762 compound ensures reliable thermal transfer
  • Compatible with Intel LGA115x, LGA2011, LGA2066 sockets
  • Supports AMD AM2, AM3, AM4, FM1, FM2 platforms

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I confirm the pump and fans are running at the rated 12000 RPM after installation?

Connect the PWM headers, power on the server, and verify fan speed in BIOS or IPMI; the pump runs continuously when the CPU is powered.

What comes in the box and do I need separate mounting hardware for LGA2011 or AM4?

The cooler ships with the cold plate, radiator, five 40 mm PWM fans, and Shin-Etsu 7762 compound pre-applied; mounting brackets for LGA115x, LGA2011/2066 square ILM, AM2/3/4 and FM1/2 are included.

Which version should I choose for a 250 W CPU in a 1U chassis?

The L25-1 is the single model rated for 250 W dissipation in a 1U form factor; no other capacity or height variants exist.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.