Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Square clear 80mm case fan with green LED illumination and ceramic bearing

E-POWER

E-POWER TOP-FAN-8CG 80mm Ceramic Bearing Green LED Case Fan

SKU CH-4X7N-ZRVQJ

An 80mm ceramic-bearing case fan with green LED lighting runs at 2400 RPM and 26 dBA

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size80mm
  • Bearing TypeCeramic
  • RPM2000-2499 RPM
  • Noise Level25 - 30 dBA
  • Quiet operation at 26 dBA for low-noise builds
  • Ceramic bearing rated for five times the life of ball bearings
  • Green LED illumination adds visible style to the case
  • 80 mm frame fits standard 80 x 80 x 25 mm mounting points
  • 2400 RPM maximum speed delivers strong airflow for cooling

80 mm Ceramic Bearing Case Fan

The E-POWER TOP-FAN-8CG is an 80 mm case fan built around a ceramic bearing and a green LED ring. It fits standard 80 x 80 x 25 mm mounting points and draws power from a four-pin Molex connector. The unit is intended for builders who want a compact cooling addition with a coloured accent.

2400 RPM airflow with 26 dBA typical noise

At 2400 RPM the fan moves a useful volume of air for small-form-factor cases or supplemental intake spots. The rated range of 2000 to 2499 RPM gives a little headroom for speed control, but the fixed Molex feed means no PWM regulation. It will not satisfy high-static-pressure demands such as dense radiator stacks.

Ceramic bearing runs at 25 to 30 dBA

The ceramic bearing is rated for five times the life expectancy of traditional ball-bearing designs while keeping operational noise between 25 and 30 dBA. In normal use the fan sits at the quieter end of that band, and the Molex connection avoids extra header load on the motherboard.

Poudarki

  • Quiet operation at 26 dBA for low-noise builds
  • Ceramic bearing rated for five times the life of ball bearings
  • Green LED illumination adds visible style to the case
  • 80 mm frame fits standard 80 x 80 x 25 mm mounting points
  • 2400 RPM maximum speed delivers strong airflow for cooling

Specifikacije

BrandE-POWER
SeriesCERAMIC
ModelTOP-FAN-8CG
TypeCase Fan
CompatibilityCase
Fan Size80mm
Bearing TypeCeramic
RPM2000-2499 RPM
Noise Level25 - 30 dBA
Power ConnectorMOLEX 4 PIN
ColorClear
LEDGreen
Dimensions80 x 80 x 25mm

Vprašanja o tem izdelku

Will this 80mm fan fit the same mounting holes as my existing 80mm case fans?

Yes, it uses the standard 80 x 80 x 25mm frame so it aligns with any 80mm mounting pattern you already have.

How can I confirm the ceramic bearing is running at the rated 2400 RPM and 26 dB after installation?

Use motherboard fan-control software or a hardware monitor to read the RPM; listen for a steady low hum around 26 dB with no bearing rattle.

Does the package include a MOLEX-to-3-pin adapter or do I need to buy one separately?

The fan ships with a fixed MOLEX 4-pin connector only; any adapter for 3-pin or PWM headers must be purchased separately.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.