Eaton
Eaton 9PX2000RTN-L 2U 2000VA 1800W Lithium-Ion UPS
2U rack/tower UPS delivers 2000VA 1800W with lithium-ion batteries, hot-swappable modules, and included Gigabit network card
- International Version120V default (100/110/120/125V)
- Input Frequency60 Hz: 50-70 Hz, 50 Hz: 40-60 Hz
- Input Connection5-20P
- VA Rating2000VA
- Watts1800W
- Output Voltage208V default (200/208/220/230/240V)
- 2000VA 1800W output protects critical loads
- Lithium-ion battery enables hot-swap replacement without downtime
- Gigabit network card provides remote monitoring and control
- 2U rack/tower design fits standard 19-inch enclosures
- 91% efficiency reduces energy consumption and heat
Eaton 9PX 2U Lithium-Ion UPS
The Eaton 9PX2000RTN-L is a 2U rack-tower UPS delivering 2000 VA and 1800 W with a lithium-ion battery. It accepts 120 V input through a 5-20P plug and provides six 5-20R outlets plus one L5-20R outlet. A gigabit network card is included for remote management.
Suits 120 V racks needing long-life battery.
This unit suits server rooms and network closets that run on 120 V utility power and want the longer cycle life and lighter weight of lithium-ion cells. It is not for sites that only have 230 V distribution or that require a form factor smaller than 2U.
2000 VA 1800 W rating decides fit
The 2000 VA and 1800 W rating determines whether the UPS can support your connected load. Check the total wattage of your equipment against the 1800 W limit before selecting this model.
Poudarki
- 2000VA 1800W output protects critical loads
- Lithium-ion battery enables hot-swap replacement without downtime
- Gigabit network card provides remote monitoring and control
- 2U rack/tower design fits standard 19-inch enclosures
- 91% efficiency reduces energy consumption and heat
Specifikacije
| Brand | EATON |
|---|---|
| Series | 9PX UPS |
| Model | 9PX2000RTN-L |
| International Version | 120V default (100/110/120/125V) |
| Input Frequency | 60 Hz: 50-70 Hz, 50 Hz: 40-60 Hz |
| Input Connection | 5-20P |
| VA Rating | 2000VA |
| Watts | 1800W |
| Output Voltage | 208V default (200/208/220/230/240V) |
| Battery Type | Lithium Ion |
| Battery Replaceable | Hot-swappable internal batteries and extended battery modules (EBMs) |
| Interface Port | RJ-45, RS-232, USB |
| Approvals | cULus Listed NOM |
| Rackmountable | Yes |
| Features | Form Factor: Rack/tower Rack Size: 2U Color: Black/silver Efficiency: 91% Internal Bypass: Yes |
| Dimensions | 3.40" x 17.30" x 23.80" |
| Weight | 51.60 lbs. |
| Package Contents | UPS Quick start guide Safety instructions USB communciation cable RS-232 serial communication cable 4-post rail for 19-inch enclosures Software leaflet 2 pedestals for tower poition Gigabit Network Card (NETWORK-M2) |
| Teža pošiljke | 24.04 kg |
| Velikost pošiljke | 635 × 508 × 127 mm |
Vprašanja o tem izdelku
What input receptacle must my facility provide for the 5-20P plug on this UPS?
The unit ships with a NEMA 5-20P input cord rated for 120 V default operation at 50-70 Hz (60 Hz nominal) or 40-60 Hz (50 Hz nominal).
Can I keep using my existing RS-232 serial cable to manage this 9PX2000RTN-L?
Yes, the package includes an RS-232 serial communication cable that connects to the rear RS-232 port alongside the USB and RJ-45 interfaces.
How do I verify the Gigabit Network Card (NETWORK-M2) is communicating after installation?
Connect the supplied Ethernet cable to the RJ-45 port, then access the card’s web interface or use Eaton’s management software to confirm network connectivity and UPS status reporting.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00049238BTC
Na zalogi