Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Metal axial cooling fan with flange mount, lead wires, ball bearing, IP44 rating

Ebm-Papst

Ebm-Papst A2D210-AB10-05 200 V 0.33/0.31 A 64/86 W 2700/3050 RPM industrial cooling fan

SKU CH-C99Z-MPRDE MPN A2D210-AB10-05

Three-phase AC axial fan delivers 539 CFM at 2700/3050 RPM with ball-bearing reliability and IP44 protection for industrial cooling

  • TypeAC Axial Imppler Fan
  • Air Flow539 CFM
  • Motor Type3-Phase
  • Voltage200 VAC
  • Hz50Hz/60Hz
  • Phase3~
  • High airflow of 539 CFM for effective cooling
  • Dual-frequency 50/60 Hz operation at 200 VAC
  • Ball bearing motor for long service life
  • IP44 rated protection against dust and splashes
  • Wide temperature range from -25 °C to 90 °C

Industrial AC Axial Fan for 200 V Three-Phase

The Ebm-Papst A2D210-AB10-05 is a flange-mounted axial fan built for 200 VAC three-phase supply at 50 Hz or 60 Hz. It delivers 539 CFM airflow using a metal impeller and ball-bearing motor rated for continuous operation between -25 °C and 90 °C. The unit draws 0.33 A at 50 Hz and 0.31 A at 60 Hz with corresponding power consumption of 64 W and 86 W.

Speed and Power Limits at Each Frequency

At 50 Hz the fan runs at 2700 RPM consuming 64 W, while at 60 Hz it reaches 3050 RPM consuming 86 W. The IP44-rated enclosure protects against solid objects over 1 mm and water splashes from any direction. Lead-wire termination requires proper connection to a three-phase supply; no speed-control interface or PWM signal is provided.

Verify Voltage Phase and Mounting Before Ordering

Confirm that your equipment provides a 200 VAC three-phase source matching the 50 Hz or 60 Hz rating. The flange mount pattern and 209.5 mm diameter with 72.5 mm depth must fit the intended enclosure cut-out. Buyers needing single-phase operation, a different voltage, or variable-speed control should look elsewhere.

Poudarki

  • High airflow of 539 CFM for effective cooling
  • Dual-frequency 50/60 Hz operation at 200 VAC
  • Ball bearing motor for long service life
  • IP44 rated protection against dust and splashes
  • Wide temperature range from -25 °C to 90 °C

Specifikacije

TypeAC Axial Imppler Fan
Brandebmpapst
ModelA2D210-AB10-05
Air Flow539 CFM
Motor Type3-Phase
Voltage200 VAC
Hz50Hz/60Hz
Phase3~
Amps0.33A/0.31A
MaterialMetal
Mount TypeFlange Mount

Vprašanja o tem izdelku

Should I pick the 50 Hz or 60 Hz rating for my 200 V three-phase supply?

The fan runs on both 50 Hz and 60 Hz; at 50 Hz it draws 0.33 A and 64 W at 2700 RPM, while at 60 Hz it draws 0.31 A and 86 W at 3050 RPM, so choose the line frequency you actually have.

What does the 539 CFM airflow figure mean once the fan is mounted in a Siemens servo spindle motor?

539 CFM is the free-air delivery; inside the motor housing the actual flow will be lower due to static pressure from the enclosure, but the 86 W maximum power at 60 Hz shows the motor can still push air against that resistance.

How does the 200 V AC three-phase input limit the fan's speed and power in practice?

The 200 V three-phase supply fixes the voltage; speed is then set by line frequency — 2700 RPM at 50 Hz and 3050 RPM at 60 Hz — with power rising from 64 W to 86 W accordingly.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.