Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black square 9 cm axial fan with black blades and central hub, wire leads attached

Fans

Fans AFB0948MSize 9 cm 48V 2.4 W 37 CFM 2100 RPM 25 dB-A ball bearing case fan

SKU CH-KR22-DP77E MPN AFB0948MSize

A 9 cm 48 V ball-bearing case fan moves 37 CFM at 2100 RPM with 25 dB-A noise

  • Quiet operation at 25 dB-A noise level
  • Efficient cooling with 37 CFM airflow
  • Reliable 48 V ball-bearing motor
  • Compact 90 mm square frame fits tight spaces
  • Low 2.4 W power draw saves energy

9 cm 48V ball-bearing case fan

The AFB0948MSize is a 90 mm axial fan built for 48 V DC systems. It draws 0.08 A and consumes 2.4 W while spinning at 2100 RPM. The ball bearing supports continuous operation in industrial and embedded environments.

Suited for tight 48 V cooling slots.

This fan fits equipment that supplies 48 V directly, such as telecom, medical, rail or industrial enclosures. It delivers 37 CFM at 25 dB-A in a 90x90x25 mm frame. Builders using standard PC 12 V headers or needing higher static pressure for dense radiators should look elsewhere.

48 V 0.08 A power input decides compatibility

The single specification that determines fit is the 48 V 0.08 A electrical rating. Only systems providing that exact voltage and current can run the fan correctly. No adapter or converter is included, so verify the power source before purchase.

Poudarki

  • Quiet operation at 25 dB-A noise level
  • Efficient cooling with 37 CFM airflow
  • Reliable 48 V ball-bearing motor
  • Compact 90 mm square frame fits tight spaces
  • Low 2.4 W power draw saves energy

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I mount the 90*90*25mm AFB0948M fan in a standard case and what step is often missed?

Align the four 90 mm corner holes with your chassis fan mounts, use the supplied screws, and connect the two-wire 48 V lead to a compatible header; the step most people miss is verifying the header supplies 48 V rather than 12 V.

What maintenance will the ball-bearing AFB0948M need after long-term operation?

The sealed ball bearing is rated for continuous duty and requires no lubrication; if noise rises above the specified 25 dB-A or speed drops below 2100 RPM, replace the entire fan unit.

At what point does the 2.4 W AFB0948M hit its thermal limit during sustained load?

The fan is designed for continuous operation at 48 V and 0.08 A; the first limit encountered under sustained use is the maximum airflow of 37 CFM, beyond which additional cooling must come from extra fans or a larger heatsink.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.