Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Square 120 mm frame, 32 mm thick, black finish, two-piece socket connector

Fans

Fans BT2B1Voltage 115V 0.19A case fan

SKU CH-FBE0-6CJTQ MPN BT2B1Voltage

115 V AC case fan with double ball bearings draws 0.19 A and fits a 120 × 120 × 32 mm frame

  • 115 V AC power suits industrial mains supplies
  • Double ball bearing extends operating life
  • 120 × 120 × 32 mm frame fits standard enclosures
  • Two-piece socket simplifies wiring and maintenance
  • 19 A draw keeps energy costs low

COMAIR BT2B1 115 V AC case fan

The COMAIR BT2B1 is a 120 mm square frame fan 32 mm thick that runs on 115 V AC mains voltage. It draws 0.19 A at start-up and 0.17 A during steady operation. Double ball bearings support the rotor for long service life in continuous duty. A two-piece socket provides the electrical connection.

Suited for industrial and embedded cooling

This fan fits equipment builders who need a mains-powered axial fan for medical devices, rail vehicles, drive enclosures, hotel systems, industrial cleaning machines, electronic cabinets or new-energy vehicle subsystems. It is not for PC builders who require a 12 V DC fan with PWM speed control or standard motherboard headers. Buyers who need variable speed regulation or lower voltage operation should look at alternative designs.

115 V AC mains voltage decides compatibility

The single specification that determines fit is the 115 V AC supply requirement. Your system must provide mains-level alternating current at this voltage; a 12 V DC header will not drive the motor. Verify that your enclosure wiring and safety approvals accept a mains-connected fan before purchase.

Poudarki

  • 115 V AC power suits industrial mains supplies
  • Double ball bearing extends operating life
  • 120 × 120 × 32 mm frame fits standard enclosures
  • Two-piece socket simplifies wiring and maintenance
  • 19 A draw keeps energy costs low

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How is the 120 × 120 × 32 mm fan mounted and which step is often missed?

The unit fits a standard 120 mm square cut-out using four corner screws; the step often missed is wiring the two-piece socket correctly for 115 V AC before securing the frame.

What maintenance will the double ball bearing need over time?

Double ball bearings are sealed and require no lubrication; if noise or vibration appears after extended use the entire fan should be replaced.

At what point does the 0.19 A / 0.17 A current draw become a limiting factor during continuous operation?

The 0.19 A start-up and 0.17 A running currents are well within a typical 115 V AC supply; the first practical limit is bearing wear after prolonged continuous duty.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.