Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Centrifugal fan with backward-curved blades, 250 mm diameter, metal housing, 230 V AC motor

Fans

Fans R2E250-AV62-05Motor centrifugal case fan 230V 75W 250mm 2650 RPM

SKU CH-WCDC-ABHY5 MPN R2E250-AV62-05Motor

A 250 mm centrifugal case fan delivering 35000 m³/h airflow at 2650 RPM on 230 V power

  • Centrifugal airflow up to 35000 m³/h for high-volume cooling
  • External rotor motor design enables compact 250 mm blade diameter
  • 230 V AC supply with 75 W power and 0.82 A current draw
  • Backward-curved impeller runs at 2650 RPM without scroll housing
  • Sturdy steel construction with 100 % analog or serial speed control

EBM centrifugal fan with backward-curved blades

The EBM R2E250-AV62-05Motor is a 230 V AC centrifugal fan built for cabinet and air-conditioning installations. Its external-rotor motor sits inside the 250 mm impeller for compact integration and direct motor cooling. The backward-curved blade design runs as a free-wheeling unit without a scroll housing. It delivers up to 35000 m³/h airflow at 2650 RPM.

Suited for industrial cabinet cooling

Engineers specifying forced-air cooling for dense enclosures or ducted HVAC modules will match the 75 W nominal power and 0.82 A draw at 230 V. The fan supports 100 % speed control via analog or serial interfaces for precise thermal management. Buyers needing a forward-curved blower with integrated scroll housing or a low-voltage DC variant should look at something else.

75 W motor headroom for continuous duty

At 175 W peak the motor absorbs start-up transients while the 75 W rating defines steady-state thermal limits. The 250 mm blade diameter moves high volume against moderate static pressure typical of filter banks and heat-exchanger arrays. Beyond the rated airflow curve the impeller stalls and motor current rises sharply, so duct resistance must stay within the published performance envelope.

Poudarki

  • Centrifugal airflow up to 35000 m³/h for high-volume cooling
  • External rotor motor design enables compact 250 mm blade diameter
  • 230 V AC supply with 75 W power and 0.82 A current draw
  • Backward-curved impeller runs at 2650 RPM without scroll housing
  • Sturdy steel construction with 100 % analog or serial speed control

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What voltage supply is required for the 230V centrifugal fan?

The fan operates on a 230V AC supply drawing 0.82A at full load.

Can the 2650 RPM fan speed be adjusted using an analog interface?

Yes, the external rotor motor supports 100% speed control via an analog interface.

How do I verify the 250mm impeller is moving air correctly after installation?

Check for airflow up to 35000 m³/h and confirm the motor runs at 2650 RPM without vibration.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.