Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact integrated pump reservoir unit with aluminium shell for ITX liquid cooling

FormulaMod

FormulaMod SPD10-T DC12V 10W PWM liquid cooler

SKU CH-VVMH-K2N59

A compact DC12V 10W PWM pump-reservoir unit with an aluminium shell for ITX liquid-cooling loops

  • TypePump
  • Efficient cooling for ITX builds with integrated 10W PWM pump-reservoir unit
  • Compact all-in-one design combines pump and tank for small-form-factor cases
  • Aluminium-alloy shell improves heat dissipation from the coolant
  • 12V PWM control adjusts pump speed to thermal demand
  • Single-package kit simplifies liquid-cooling installation

Compact pump-reservoir for ITX builds

The FormulaMod SPD10-T combines a 10 W PWM pump with an integrated reservoir in a single aluminium housing. It targets small-form-factor builders who need a self-contained liquid-cooling loop without external pump mounting. The DC 12 V input allows direct connection to a standard motherboard header.

Sustained-load behaviour

PWM control lets the pump scale speed with coolant temperature rather than running at a fixed rate. The aluminium shell acts as a passive radiator surface, helping to shed heat continuously during long compute sessions. Stable flow is maintained without the pressure spikes seen in burst-only designs.

Upgrade path and fit

This unit replaces separate pump and reservoir assemblies that consume extra clearance in mini-ITX cases. The jump is worthwhile when loop simplicity and reduced tubing runs matter more than maximum flow capacity. Builders needing higher flow rates or multiple radiators should consider larger discrete pumps.

Poudarki

  • Efficient cooling for ITX builds with integrated 10W PWM pump-reservoir unit
  • Compact all-in-one design combines pump and tank for small-form-factor cases
  • Aluminium-alloy shell improves heat dissipation from the coolant
  • 12V PWM control adjusts pump speed to thermal demand
  • Single-package kit simplifies liquid-cooling installation

Specifikacije

TypePump

Vprašanja o tem izdelku

How much power does the 10 W pump draw when running continuously in an ITX build?

The integrated pump is rated at 10 W and runs on 12 V DC, so sustained power draw stays at that level during all-day operation.

Which fittings and coolant must I already have to complete the loop with the SPD10-T?

You will need compatible tubing, barbs or compression fittings, a radiator, water blocks and coolant; the unit only provides the pump and reservoir.

Will the aluminum alloy shell cause galvanic corrosion if I keep my existing copper water blocks?

The reservoir shell is aluminum alloy, so mixing it with copper components requires corrosion-inhibiting coolant to prevent galvanic issues.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.