FSP
FSP FSP450-50SAC 450W SFX 80 Plus Bronze power supply
A 450 W SFX power supply with 80 Plus Bronze efficiency, an 80 mm fan, single 12 V rail and black ribbon cables for SFX or ATX cases
- TypeSFX
- Maximum Power450 W
- Fans1 x 80 mm
- +12V RailsSingle
- Max PSU Length125 mm
- ModularNo
Options SFX Bronze (450W)
- SFX Bronze (450W)
- SFX 80+ Gold (650W)
- 80 Plus Bronze certification delivers up to 85% efficiency at typical load
- Intelligent 80 mm fan adjusts speed to temperature for quiet cooling
- DC-to-DC module design provides stable power conversion across all rails
- SFX 125 mm form factor includes bracket for ATX and Micro-ATX cases
- Full protection suite covers OCP OVP SCP OPP OTP for system safety
SFX 450 W power supply
The FSP FSP450-50SAC is a 450 W SFX unit built to the SFX12V 3.3 standard and certified 80 Plus Bronze. It delivers a single +12 V rail and uses an 80 mm fan with intelligent speed control for temperature-based airflow. The 125 mm housing fits SFX, Micro-ATX and Mini-ITX layouts, and an included bracket allows installation in standard ATX cases. Black ribbon cables keep the internal look clean.
Compact builds and ATX retrofits
This supply suits small-form-factor systems that need 450 W from an SFX footprint, and it also works for builders converting an ATX chassis with the bundled bracket. Buyers who need modular cabling to reduce clutter should look elsewhere, as the cables are fixed. Systems that require more than 450 W of continuous power will need a higher-capacity unit.
Straightforward fit with fixed cables
The 125 mm depth slides into most SFX bays, and the ATX bracket screws on without special tools. Because the cables are non-modular, routing the unused leads can be the only awkward step in tight chassis. The wide 100-240 V input handles global mains voltages automatically. Ensure the case allows 125 mm of PSU clearance before ordering.
Poudarki
- 80 Plus Bronze certification delivers up to 85% efficiency at typical load
- Intelligent 80 mm fan adjusts speed to temperature for quiet cooling
- DC-to-DC module design provides stable power conversion across all rails
- SFX 125 mm form factor includes bracket for ATX and Micro-ATX cases
- Full protection suite covers OCP OVP SCP OPP OTP for system safety
Specifikacije
| Brand | FSP |
|---|---|
| Model | FSP450-50SAC |
| Type | SFX |
| Maximum Power | 450 W |
| Fans | 1 x 80 mm |
| +12V Rails | Single |
| Max PSU Length | 125 mm |
| Modular | No |
| Energy-Efficient | 80 PLUS BRONZE Certified |
| Teža pošiljke | 1.81 kg |
| Velikost pošiljke | 197 × 191 × 76 mm |
Druge različice tega modela
še 1 v isti paleti
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Vprašanja o tem izdelku
Does my case need an SFX slot or the included ATX bracket to mount this 125 mm PSU?
The unit is 125 mm long and ships with an SFX-to-ATX adapter bracket so it fits SFX, Micro-ATX and Mini-ITX cases.
Will the fixed black ribbon cables reach the 24-pin and 8-pin connectors on an older motherboard?
All cables are fixed black ribbon type; measure your board’s connector positions against the cable lengths before buying.
How do I confirm the 80 mm fan is running intelligently after installation?
The fan should spin at low speed when the PSU is cool and ramp up as internal temperature rises.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
OWC 16GB DDR4 3200 CL22 1.2V 260pin SODIMM Alienware M15 R5 R6
- 16GB
- 260-Pin DDR4 Non-EC…
OWC 32GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware Area-51M R2
- 32GB
- 260-Pin DDR4 Non-EC…
OWC 128GB (2x64GB) DDR4 2933 CL21 2Rx4 288-pin 1.2V ECC RDIMM memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR4 ECC RD…




