Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact white ASIC miner with dual 6-pin power ports and built-in PSU

Goldshell

Goldshell Mini Doge III Dual Mode 700M/550M mining hardware

SKU CH-6RRD-40JT9

ASIC miner for LTC and DOGE with dual hashrate modes of 700 Mh/s at 400 W or 550 Mh/s at 260 W

  • Dual-mode operation lets you choose 700Mh/s or 550Mh/s hashrate
  • Default high-performance mode delivers 700Mh/s at 400W power draw
  • Low-power mode runs at 550Mh/s while drawing only 260W
  • Included PSU simplifies setup with dual 6-pin connectors
  • Compact ASIC design fits small spaces for LTC and DOGE mining

Dual-mode Dogecoin and Litecoin ASIC

The Goldshell Mini Doge III is a compact ASIC miner built for Scrypt-based coins such as Dogecoin and Litecoin. It targets hobbyists and small-scale operators who want a self-contained unit with an included power supply. The hardware ships new and ready to configure for mining pools.

Two power profiles with Wi-Fi control

A default mode delivers 700Mh/s±5% at 400W±5%, while a low-power mode drops to 550Mh/s±5% at 260W±5%, letting owners trade throughput for efficiency. Built-in Wi-Fi removes the need for a wired Ethernet link and enables remote monitoring through a browser interface. The bundled PSU eliminates the hunt for a compatible external brick.

Dual 6-pin power input and compact chassis

The enclosure uses two 6-pin connectors that must both be fully seated before the miner is powered on; running on a single connector is not supported. This wiring requirement protects the board from uneven current draw during start-up. The small footprint suits shelf or rack mounting where space and noise are constrained.

Poudarki

  • Dual-mode operation lets you choose 700Mh/s or 550Mh/s hashrate
  • Default high-performance mode delivers 700Mh/s at 400W power draw
  • Low-power mode runs at 550Mh/s while drawing only 260W
  • Included PSU simplifies setup with dual 6-pin connectors
  • Compact ASIC design fits small spaces for LTC and DOGE mining

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What maintenance or replacement will the two 6PIN power connectors on the Mini Doge III need over time?

The two 6PIN power connectors should be inspected periodically for secure seating and signs of heat damage; reseat or replace cables if pins discolour or loosen.

What limit shows up first when the miner runs continuously at 700Mh/s and 400W?

Sustained 400W draw makes heat dissipation the first bottleneck; the built-in cooling must move that load without throttling the 700Mh/s hashrate.

How much power and heat does the unit produce when running all day in low-power mode at 550Mh/s?

In low-power mode the miner draws 260W±5% at 550Mh/s±5%, so total heat output matches that 260W electrical load continuously.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.