Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Twelve black nickel-plated brass 45-degree G1/4 rotary fittings with O-rings

greenDracaena

greenDracaena 12-pack 45° G1/4" Rotary Fitting Black

SKU CH-VNEF-HG9NZ

Twelve nickel-plated brass 45° G1/4" rotary fittings with O-rings for custom water-cooling loops

  • Radiator Size12 pcs
  • Fan Size12 pcs
  • ColorBlack
  • LED ColorBlack (45 Rotary)
  • Package ContentsO-rings
  • Nickel-plated brass resists corrosion for long loop life
  • 45° rotary design simplifies tight tubing runs
  • G1/4" BSP threads fit rigid, metal and PETG tubes
  • 5 mm male and 6 mm female thread lengths ensure secure seal
  • 12-piece pack with O-rings covers full custom builds

12-pack 45° G1/4" Rotary Fittings

This pack supplies twelve black nickel-plated brass adapters with precision G1/4" male-to-female threads for custom liquid-cooling loops. Each fitting rotates to align tubing runs at a 45-degree angle, simplifying routing in tight spaces. The 5 mm male and 6 mm female thread lengths suit rigid, metal and PETG tubing. O-rings are included for every connector.

Suits builders adding multiple angled joints

The 45-degree rotary profile helps redirect flow without sharp bends, so it fits loops that need gentle direction changes across many points. Systems that require only straight couplers or different angled elbows will not use the specific angle this pack provides. Buyers needing a single fitting or a different thread standard should look elsewhere.

Twelve fittings in one package

The box contains exactly twelve 45° G1/4" rotary adapters, so the loop planner must confirm that quantity matches the build before ordering. No other counts or angles are included in this SKU.

Poudarki

  • Nickel-plated brass resists corrosion for long loop life
  • 45° rotary design simplifies tight tubing runs
  • G1/4" BSP threads fit rigid, metal and PETG tubes
  • 5 mm male and 6 mm female thread lengths ensure secure seal
  • 12-piece pack with O-rings covers full custom builds

Specifikacije

BrandgreenDracaena
SeriesBlack (45 Rotary)
Radiator Size12 pcs
Fan Size12 pcs
ColorBlack
LED ColorBlack (45 Rotary)
Package ContentsO-rings

Vprašanja o tem izdelku

What G1/4" components do I need in my loop for these 45° rotary fittings to connect?

Each fitting has a G1/4" BSP male thread (5 mm) on one side and a G1/4" BSP female thread (6 mm) on the other, so you need matching G1/4" ports on blocks, radiators, reservoirs or other fittings.

Will the nickel-plated brass threads gall or corrode against older copper or bare-brass blocks I already own?

The nickel plating resists rust and galvanic corrosion, so the fittings mate safely with copper, bare brass or other nickel-plated G1/4" hardware in the same loop.

How can I verify the 45° angle seats correctly and does not leak after I tighten the 12 fittings?

Hand-tighten each rotary joint until the O-ring seats, then pressurise the loop; a dry, steady 45° orientation with no drips confirms correct installation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.