Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Six black chrome brass G1/4" to 3/8" barb fittings

greenDracaena

greenDracaena G1/4" to 3/8" Barb Fitting 6 Pack Black

SKU CH-STN1-FJHG9

Six brass G1/4" to 3/8" barb fittings with O-ring seals connect 9-10mm soft tubing in custom liquid-cooling loops

  • TypeWater
  • Block CompatibilityDesktop
  • Block Compatibility - AMDDesktop
  • Block Compatibility - IntelDesktop
  • Radiator Size6 pcs
  • Fan Size6 pcs
  • Quick, secure setup with G1/4" male thread and O-ring seal
  • Fits 9-10mm ID soft tubes via 3/8" barb for versatile compatibility
  • Durable brass with black chrome finish resists rust for long life
  • Precise 11mm OD, 15mm barb, 5mm thread, 25mm overall for perfect fit
  • Six fittings per pack supply ample connectors for custom loops

G1/4" to 3/8" Barb Fitting 6-Pack

This set provides six G1/4" male-thread to 3/8" inner-diameter barb connectors for custom desktop water cooling loops. Each fitting is machined from brass with a black chrome finish and includes an O-ring for a watertight seal. The pack suits builders assembling or maintaining a soft-tube system that uses standard G1/4" component ports. It is not for anyone needing hard-tube compression fittings or a different thread standard.

Installation and Common Issues

The barb slips over 9-10mm ID soft tubing and secures with a standard compression ring or clamp. The G1/4" thread engages component ports with a 5mm thread depth, while the 11mm barb OD and 15mm barb length give a firm grip. Leaks usually come from missing the O-ring, insufficient tubing insertion, or an overtightened clamp that cuts the tube. The 25mm overall length fits most block and radiator ports without clearance problems.

Critical Specification

The decisive figure is the 3/8" (9-10mm) inner-diameter barb size; it must match your soft tubing ID exactly. The G1/4" male thread is the other fixed interface — confirm every target component uses that port standard. If your tubing or ports differ, these six fittings will not work.

Poudarki

  • Quick, secure setup with G1/4" male thread and O-ring seal
  • Fits 9-10mm ID soft tubes via 3/8" barb for versatile compatibility
  • Durable brass with black chrome finish resists rust for long life
  • Precise 11mm OD, 15mm barb, 5mm thread, 25mm overall for perfect fit
  • Six fittings per pack supply ample connectors for custom loops

Specifikacije

BrandgreenDracaena
ModelD-BBT-3F-Black-6
Part NumberD-BBT-3F-Black-6
TypeWater
Block CompatibilityDesktop
Block Compatibility - AMDDesktop
Block Compatibility - IntelDesktop
Radiator Size6 pcs
Fan Size6 pcs
Fan ConnectorG1/4"
ColorBlack

Vprašanja o tem izdelku

How can I verify the fittings are sealing correctly after installation?

Pressure-test the loop and inspect each G1/4" thread O-ring for drips; the 11 mm barb OD and 15 mm barb length should sit fully inside 9-10 mm ID tubing with no gaps.

What comes in the package and is anything else required?

Six black chrome-plated brass G1/4" to 3/8" barb fittings are included; clamps or compression rings for the 9-10 mm soft tubing must be purchased separately.

Which version should I choose for my loop?

The single model D-BBT-3F-Black-6 supplies six identical G1/4" male to 3/8" ID barbs with 5 mm thread length and 25 mm overall length, covering standard desktop water-cooling blocks and radiators.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.