Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

Gulfe

Gulfe ATX power supply for HP Pavilion H8 1010PT 1011 1011IT

SKU CH-8SD3-HJ0SS

ATX power supply with 24-pin, 4-pin, three SATA, two LP4 and one floppy connector, 115/230 V input, over-current and over-power protection, reduced depth

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX reduced depth fits tight HP Pavilion cases
  • Dual-voltage 115/230 V input works worldwide
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • Over-current and over-power protection guards components
  • Hi-Pot tested with low ripple for clean power

Direct replacement for HP Pavilion H8 desktops

This ATX power supply is built to fit the HP Pavilion H8 1010PT, 1011 and 1011IT models. It matches the original form factor and connector layout so the system powers on without adapter cables. The unit is new and includes over-current and over-power protection.

Reduced depth ATX form factor

The housing measures 5.86 inches by 3.3 inches, shorter than standard ATX units, which lets it slide into the compact Pavilion chassis. It accepts 115 or 230 V input and delivers +5 V, -5 V, +12 V1, +12 V2, +3.3 V, -12 V and +5 V standby rails. Hold-up time is rated at 17 ms minimum.

Simple swap with standard ATX connectors

One 24-pin ATX connector, one 4-pin P4 12 V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin cover the motherboard and drives. The single fan exhausts heat through the rear grille. Verify the 4-pin CPU power cable reaches the motherboard header before closing the case.

Poudarki

  • ATX reduced depth fits tight HP Pavilion cases
  • Dual-voltage 115/230 V input works worldwide
  • 24-pin ATX plus 4-pin CPU and three SATA connectors
  • Over-current and over-power protection guards components
  • Hi-Pot tested with low ripple for clean power

Specifikacije

BrandGulfe
TypeATX
Fans1
Weight2.5

Vprašanja o tem izdelku

What does the ATX 24-pin connector mean when I install this in my HP Pavilion?

The 20+4 pin ATX connector plugs directly into the motherboard main power socket on the H8 1010PT, 1011 or 1011IT models.

How does the 115 / 230 V input range affect daily use?

The unit auto-switches between 110 V and 220 V mains, so it works on either voltage without a manual selector.

Will the reduced depth fit my Pavilion H8 case?

At 5.86 inches deep and 3.3 inches wide it matches the reduced-depth ATX form factor specified for the H8 chassis.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.