Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
3.5 inch silver internal hard drive with SATA connector

HP

HP 160 GB 3.5" 7200 rpm SATA Internal Hard Drive

SKU CH-R00R-5QME8

160 GB 3.5" SATA internal hard drive spinning at 7200 rpm for desktop or server storage

  • Capacity160GB
  • FeaturesHard Drive
  • 160 GB capacity stores essential files and backups
  • 7200 rpm spindle speed delivers responsive data access
  • SATA 300 interface connects to standard desktop ports
  • 5 inch form factor fits regular drive bays
  • Hot-swappable design allows drive changes without shutdown

160 GB 3.5" SATA Hard Drive

This 160 GB 3.5-inch internal hard drive spins at 7200 rpm and connects through a SATA interface. It is built as an HP Qualified Option for use in compatible HP ProLiant servers. The drive suits IT teams that need a direct replacement for a failed or missing original drive in supported systems.

Hot-Swap SATA/300 Replacement

The drive uses the SATA/300 standard and supports hot-swap installation in the HP ProLiant DL180 G5 server. It replaces an existing 160 GB SATA drive without requiring a caddy change or firmware update. The upgrade is worth it when the current drive has failed or when a cold spare is needed for the same chassis.

SATA/300 Interface Limits

The SATA/300 interface caps the maximum theoretical transfer rate at 300 MB/s, which is lower than modern SATA revisions. Mechanical latency at 7200 rpm limits random access performance compared with solid-state storage. Buyers who need higher throughput or lower latency should consider a different storage technology.

Poudarki

  • 160 GB capacity stores essential files and backups
  • 7200 rpm spindle speed delivers responsive data access
  • SATA 300 interface connects to standard desktop ports
  • 5 inch form factor fits regular drive bays
  • Hot-swappable design allows drive changes without shutdown

Specifikacije

BrandHPE-IMSourcing
Capacity160GB
FeaturesHard Drive

Vprašanja o tem izdelku

What drive bays will accept this 3.5-inch SATA drive?

It fits any standard 3.5-inch internal bay and connects via the SATA/300 interface on the motherboard or controller.

How is the drive installed in an HP ProLiant DL180 G5, and what step is often missed?

Slide the drive into a hot-swap bay until the latch clicks, then verify the SATA connector is fully seated; the step often missed is confirming the server BIOS detects the new 160 GB volume.

When should this 7200 rpm mechanical drive be replaced?

Replace it if SMART diagnostics report reallocated sectors, if unusual noise appears, or after the rated service life of the spindle motor is reached.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.