HPE
HPE 787336-001 400 GB 2.5" SAS 12Gb/s internal solid state drive
400 GB 2.5" SAS 12Gb/s internal solid state drive for HPE MSA 2040 SAN storage systems
- 400 GB capacity stores large datasets on a single drive
- 12Gb/s SAS interface delivers fast data transfer for storage systems
- 5-inch form factor fits standard internal drive bays
- Designed for HPE MSA 2040 SAN Storage compatibility
- New condition ensures full manufacturer specification and reliability
HPE 787336-001 400 GB SAS 12Gb/s SSD
This HPE solid state drive provides 400 GB of storage in a 2.5 inch internal form factor. It connects through a SAS interface operating at 12Gb/s. The drive is designed for use in HPE MSA 2040 SAN Storage systems. It ships in new condition with packaging that may vary.
Replacing mechanical SAS drives in MSA 2040 arrays
The drive upgrades storage systems currently using spinning SAS disks of the same physical size and interface. The jump is worth it when the workload needs lower latency and higher IOPS without changing cabling or controller hardware. It fits directly into existing 2.5 inch drive bays. The 12Gb/s link matches current controller speeds.
Suited for HPE MSA 2040 SAN capacity expansion
This unit suits administrators expanding capacity or refreshing tiers inside a compatible MSA 2040 enclosure. Buyers who need a different interface, a larger capacity, or support for non-HPE arrays should look at other options. The fixed 400 GB capacity may not meet high-density requirements. Compatibility is limited to the stated storage system.
Poudarki
- 400 GB capacity stores large datasets on a single drive
- 12Gb/s SAS interface delivers fast data transfer for storage systems
- 5-inch form factor fits standard internal drive bays
- Designed for HPE MSA 2040 SAN Storage compatibility
- New condition ensures full manufacturer specification and reliability
Specifikacije
| Brand | HPE |
|---|
Vprašanja o tem izdelku
Will the 2.5" form factor fit a standard 2.5" drive bay in the HPE MSA 2040 SAN Storage?
Yes, the 2.5" form factor matches the standard 2.5" drive bays used in the HPE MSA 2040 SAN Storage enclosure.
How is the SAS 12Gb/s drive installed in the HPE MSA 2040, and what step is often missed?
Slide the drive into a hot-plug carrier until the connector seats firmly, then lock the carrier latch; the step often missed is fully engaging the latch so the drive registers with the controller.
When should the 400 GB SAS solid state drive be replaced in an HPE MSA 2040 array?
Replace the drive when the HPE MSA 2040 management software reports a predictive failure alert or when the drive reaches its rated write endurance limit.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
