HPE
HPE 833928-B21 4TB 7.2K 12Gbps SAS 3.5" internal hard drive
A 4 TB SAS hard drive spinning at 7200 RPM with a 12 Gb/s interface in a 3.5 inch hot-swap form factor
- InterfaceSAS 12Gb/s
- Capacity4TB
- RPM7200 RPM
- Average Seek Time8.5ms
- Form Factor3.5"
- 4TB capacity stores large datasets
- 12Gbps SAS interface enables fast data transfer
- 7200 RPM spindle speed supports responsive performance
- 5-inch form factor fits standard drive bays
- Hot-swap design allows drive replacement without downtime
HPE 4TB 12Gb/s SAS Enterprise Drive
This HPE 833928-B21 is a 4TB 3.5" internal hard drive built for enterprise and midline workloads. It spins at 7200 RPM and connects through a SAS 12Gb/s interface with an average seek time of 8.5ms. The drive is supplied new in a hot-swap carrier.
Suited for high-transaction servers and arrays
Buyers who need a 12Gb/s SAS connection for high-availability storage will find the correct interface and form factor here. Builders whose chassis or controller only accept 2.5" drives or a different interface cannot use this part.
The SAS 12Gb/s interface decides compatibility
The drive requires a backplane and controller that support 12Gb/s SAS signalling. Without that link the drive will not function, so verify the host system provides a SAS 12Gb/s connection before purchase.
Poudarki
- 4TB capacity stores large datasets
- 12Gbps SAS interface enables fast data transfer
- 7200 RPM spindle speed supports responsive performance
- 5-inch form factor fits standard drive bays
- Hot-swap design allows drive replacement without downtime
Specifikacije
| Brand | HPE |
|---|---|
| Part Number | 833928-B21 |
| Interface | SAS 12Gb/s |
| Capacity | 4TB |
| RPM | 7200 RPM |
| Average Seek Time | 8.5ms |
| Form Factor | 3.5" |
Vprašanja o tem izdelku
How do I install the 833928-B21 in a hot-swap 3.5" SAS bay?
Slide the drive into the carrier until the connector seats firmly on the 12Gbps SAS backplane, then lock the lever; the step most people miss is not fully engaging the carrier latch, which leaves the drive loose and causes connection errors
What maintenance will the 4TB 7200 RPM drive need later?
No scheduled maintenance is required; monitor SMART attributes for reallocated sectors and rising seek times, and replace the unit once the error counters approach the manufacturer thresholds
What limit appears first when the 12Gbps SAS drive runs sustained writes?
The 7200 RPM spindle caps sequential throughput at the media transfer rate, so sustained write streams hit the mechanical speed ceiling before the 12Gbps interface saturates
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
