Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 2U rack server with front drive bays and rail kit

HPE

HPE ProLiant DL380 Gen11 2U rack server dual Xeon 4410y 12-core 2.00GHz 1TB DDR5 15.36TB SAS SSD

SKU CH-1ZZH-FNA1T

A 2U rack server with dual 12-core Xeon 4410y CPUs, 1TB DDR5 ECC memory and 15.36TB of enterprise SAS SSD storage

  • Dual 12-core Xeon 4410y processors scale virtualized workloads
  • 1TB DDR5-4800 ECC memory supports large datasets
  • 36TB enterprise SAS SSDs deliver high-speed storage
  • Hot-swap redundant power supplies maintain uptime
  • iLO 6 remote management simplifies server administration

Dual Xeon 12-core 2.00 GHz foundation

This HPE ProLiant DL380 Gen11 2U rack server ships with two Xeon Silver 4410y processors, each providing 12 cores at 2.00 GHz with a 3.90 GHz turbo ceiling. The 1 TB DDR5-4800 ECC memory kit arrives as 16 modules of 64 GB, giving ample headroom for virtualised workloads and memory-intensive databases. Installation of both memory and drives is required before deployment.

15.36 TB enterprise SAS capacity

Eight 1.92 TB enterprise SAS 12 Gb/s SSDs deliver 15.36 TB of raw flash storage behind an MR408i-o Gen11 controller with 4 GB cache. The SAS interface and enterprise endurance rating suit sustained mixed read-write traffic such as OLTP databases or hypervisor datastores. Capacity scales within the 2U chassis until drive bays or controller lanes are exhausted.

iLO 6, redundant power and rail kit

Integrated Lights-Out 6 Standard with Intelligent Provisioning enables remote firmware updates, power control and OS deployment without physical presence. Dual hot-swap power supplies allow replacement of a failed unit while the server remains online. The included rail kit secures the chassis in a standard rack, simplifying the initial installation.

Poudarki

  • Dual 12-core Xeon 4410y processors scale virtualized workloads
  • 1TB DDR5-4800 ECC memory supports large datasets
  • 36TB enterprise SAS SSDs deliver high-speed storage
  • Hot-swap redundant power supplies maintain uptime
  • iLO 6 remote management simplifies server administration

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Will the 1TB DDR5-4800 ECC memory work with my existing DDR5 DIMMs?

The server uses 16 x 64GB DDR5-4800 PC5-38400 ECC buffered DIMMs; matching speed, rank and ECC type is required for compatibility.

How do I verify the MR408i-o controller and 8 x 1.92TB SAS SSDs are operating correctly after installation?

Use HPE iLO 6 Intelligent Provisioning to run storage diagnostics, confirm all 15.36TB appear in the RAID array and check drive health LEDs on the front panel.

Which components ship separately and must be installed before first boot?

The 16 memory modules and 8 x 1.92TB 2.5-inch SAS SSDs are packaged separately and require installation; rail kit, dual redundant power supplies and iLO 6 are pre-fitted.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.