Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 2U rack server chassis with front drive bays and rail kit

HPE

HPE ProLiant DL380 Gen11 2U rack server dual Xeon 5416s 16-core 2.00 GHz 512GB DDR5 61.44TB SAS SSD

SKU CH-4W4A-BP5H3

A 2U rack server with dual 16-core Xeon 5416s, 512GB DDR5 ECC memory and 61.44TB of 2.5-inch SAS SSD storage

  • Dual 16-core Xeon 5416s processors handle heavy virtualized workloads
  • 512GB DDR5-4800MHz ECC memory scales for large datasets
  • 44TB enterprise SAS SSD storage delivers high-throughput capacity
  • Redundant hot-swap power supplies keep the server running during maintenance
  • iLO 6 remote management enables lights-out provisioning and monitoring

HPE ProLiant DL380 Gen11 2U rack server

The HPE ProLiant DL380 Gen11 is a 2U rack server built for hybrid environments that demand expandability and scalable bandwidth. It arrives with dual Xeon Gold 5416s 16-core processors running at 2.00 GHz with a 4.00 GHz turbo frequency. The system includes 512GB of DDR5-4800MHz ECC buffered memory and 61.44TB of enterprise SAS 12Gb/s SSD storage across eight 7.68TB drives. A storage controller with 4GB cache and iLO 6 remote management complete the platform.

Suited for virtualised databases

This configuration targets organisations running database applications, virtualisation clusters or multiple simultaneous workloads that benefit from high core counts and large memory capacity. Redundant hot-swappable power supplies allow maintenance without downtime. Buyers who need the drives and memory pre-installed should note that installation is required. Environments requiring a different storage interface or a smaller memory footprint are not addressed by this specification.

61.44TB SAS SSD capacity with MR408i-o controller

The storage subsystem delivers 61.44TB of raw capacity using eight 2.5-inch 7.68TB SAS SSDs connected through an MR408i-o Gen11 controller with 4GB cache. This combination determines whether the server meets your performance and redundancy requirements for enterprise workloads.

Poudarki

  • Dual 16-core Xeon 5416s processors handle heavy virtualized workloads
  • 512GB DDR5-4800MHz ECC memory scales for large datasets
  • 44TB enterprise SAS SSD storage delivers high-throughput capacity
  • Redundant hot-swap power supplies keep the server running during maintenance
  • iLO 6 remote management enables lights-out provisioning and monitoring

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Do I need to install the 16 memory modules and 8 drives myself before the server will boot?

Yes, the 512GB DDR5 memory kit (16 x 32GB) and the 61.44TB SAS SSD set (8 x 7.68TB) are supplied separately and must be installed prior to use.

Can I keep my existing SAS 12Gb/s drives and add them to the 8 x 7.68TB SSDs already included?

The MR408i-o storage controller supports additional SAS 12Gb/s drives, so older compatible drives can be added alongside the supplied 7.68TB SSDs.

How do I confirm the dual Xeon 5416s processors and 512GB DDR5 memory are detected correctly after assembly?

Use the integrated iLO 6 remote management interface or enter the system BIOS during POST to verify both CPUs and all 16 memory modules are reported.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.