SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
IBM
A 300 GB SAS drive spinning at 10000 RPM in a 2.5 inch hot-swap form factor for server storage
This 2.5 inch IBM hard drive delivers 300 GB of storage on a SAS 6Gb/s interface spinning at 10000 RPM. It is built for servers and storage arrays that need fast, reliable access to transactional data. The bare-drive packaging suits integrators and IT departments replacing or expanding existing drive bays.
The small form factor slides into standard hot-swap trays without powering down the chassis. A SAS backplane or RAID controller with 6Gb/s ports is required to connect the drive. Using this drive frees larger 3.5 inch bays for higher-capacity archival disks while keeping performance-sensitive workloads on the faster spindles.
At 10000 RPM the drive generates more heat and vibration than slower nearline disks, so adequate airflow across the bays is essential. The SAS interface draws power directly from the backplane, eliminating extra cabling. Acoustic output is noticeable in quiet rooms but typical for enterprise 10K mechanisms under normal load.
| Brand | IBM |
|---|---|
| Model | 42D0638 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 300GB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Features | SFF slim Hot-Swap hard drive |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Teža pošiljke | 0.91 kg |
| Velikost pošiljke | 127 × 102 × 76 mm |
The 10000 RPM spindle speed and SAS 6Gb/s interface set the maximum sustained throughput, so the mechanical rotation rate becomes the bottleneck before the bus saturates.
The 2.5" form factor and 10000 RPM operation generate typical enterprise-level heat and acoustic output for a hot-swap SAS drive in a server chassis.
A server or controller with a SAS 6Gb/s backplane or HBA and a 2.5" hot-swap bay is required for the drive to function.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?