ICY DOCK MB492SKL-B 2 x 2.5" SATA/SAS hdd accessory for 3.5" bay
- Black
- 2 x 2.5" Drive to 3…
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
ICY DOCK
Mounts one 2.5" SATA drive into a 3.5" bay using a removable metal tray with Eagle-Hook lock and SATA 6Gbps support
Model ToughArmors 1BAY
Prečrtane različice obstajajo, vendar tukaj niso na voljo.
Option 1 x 3.5in
Prečrtane različice obstajajo, vendar tukaj niso na voljo.
The ICY DOCK MB991SK-B is a full-metal mobile rack that installs a single 2.5" SATA hard drive or SSD into an external 3.5" floppy bay. It supports drives from 5 mm to 15 mm thick and uses the rugged EZ Slide Mini Tray with an Eagle-Hook lock and metal safeguard key for secure retention. A single SATA 15-pin connector powers the entire unit and the tray enables quick swaps between compatible ToughArmor enclosures.
This rack suits system integrators and enthusiasts who want hot-swap convenience for a 2.5" SATA drive without occupying a 5.25" bay or internal 3.5" mount. It is not suitable for M.2 or U.2 form factors, nor for configurations that require more than one drive in the same bay. Users without an accessible external 3.5" opening should consider a different mounting solution.
The host connection is a single 7-pin SATA port that delivers up to 6 Gbps transfer rates, limited only by the installed drive's own speed. No additional controller or adapter is needed; the rack passes the native SATA I, II or III signal directly to the motherboard or add-in card. This specification determines whether the enclosure matches the available header and the performance ceiling of the storage device.
| Brand | ICY DOCK |
|---|---|
| Model | MB991SK-B |
| Color | Black |
| Conversion Tray | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Drives Support | 1 x 2.5" Drive to 3.5" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Specifications | Host Interface : Single 7pin SATA Drive Fit : Single 2.5" SATA I/ II/ III HDD/ SSD (7-15mm Height Drive) Drive Bay : 3.5" floppy drive bay Transfer Rate : Up to 6 Gb/sec. (depending on hard drive speed) Power Input : Single 15pin SATA power port Insert& Extract connection Via : Direct SATA hard drive connection Structure : Full Metal Drive Cooling : Metal heat dispersion LED Indication : Device Power & Drive Activity LED Color : Green : Device Power ; Amber : Drive Activity Dimension (L x W x H) : 5.32" x 4.00" x 1.01" Weight : 0.88 lbs |
| Teža pošiljke | 0.46 kg |
| Velikost pošiljke | 152 × 114 × 36 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The MB991SK-B is the rack and tray only; you supply your own 2.5" SATA HDD or SSD.
The rack supports all three SATA generations through the same 7-pin connector; pick any 2.5" SATA drive and it will run at its rated speed.
It is the ceiling of the SATA III link; actual throughput depends on the drive you fit and the host controller.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?