Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Three small green circuit boards each with a silver SMA antenna connector and a short black antenna attached

KEHIPI

KEHIPI 3pcs NRF24L01+PA+LNA 2.4G 1100m SMA Antenna Development Board

SKU CH-ABZC-3DQ26

Three 2.4 GHz transceiver modules with power amplifiers and SMA antennas for 1100 m line-of-sight range and SPI control

  • 3-pack gives spare modules for multi-node projects
  • 4 GHz ISM band with 125 selectable channels avoids interference
  • 800 m line-of-sight range with SMA antenna extends coverage
  • 5 V tolerant SPI pins connect directly to Arduino
  • Three data rates from 250 kbps to 2 Mbps suit different throughput needs

KEHIPI 3pcs NRF24L01+PA+LNA Development Board

This pack contains three 2.4 GHz wireless transceiver modules with integrated power amplifier and low-noise amplifier. Each board includes an SMA antenna connector for extended range. The modules operate on the ISM band and communicate via SPI with host microcontrollers such as Arduino or Raspberry Pi.

Suits makers building long-range sensor networks

Developers creating wireless peripherals, remote controls or home automation nodes benefit from the 1100 metre line-of-sight range and 125 selectable channels. Projects requiring Bluetooth, Wi-Fi or mesh networking protocols should look elsewhere as this module uses a proprietary 2.4 GHz protocol only.

3.6 V maximum operating voltage decides

The module runs from 3 V to 3.6 V and draws up to 115 mA during transmission. Any 5 V logic rail must be level-shifted before connecting to the SPI pins despite 5 V tolerant inputs. Supplying more than 3.6 V will damage the device.

Poudarki

  • 3-pack gives spare modules for multi-node projects
  • 4 GHz ISM band with 125 selectable channels avoids interference
  • 800 m line-of-sight range with SMA antenna extends coverage
  • 5 V tolerant SPI pins connect directly to Arduino
  • Three data rates from 250 kbps to 2 Mbps suit different throughput needs

Specifikacije

BrandAITRIP
Model15302
Part Number15302

Vprašanja o tem izdelku

Should I buy the single module or the 3-piece pack for my project?

The listing includes three NRF24L01+PA+LNA modules and three SMA antennas, giving you spare units for multiple nodes or prototypes.

What does the 1100-metre range claim mean when the board is inside a real device?

The 800-plus metres line-of-sight figure assumes clear air; walls, enclosures and nearby 2.4 GHz traffic will reduce practical distance considerably.

Which SPI settings does the 2.4 GHz transceiver support and what throughput can I expect?

The module offers 125 selectable channels and data rates of 250 kbps, 1 Mbps or 2 Mbps over a 4-pin SPI link.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.