Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two small green circuit boards with camera lenses in clear acrylic cases, flat ribbon cables attached

KEHIPI

KEHIPI 5MP 1080P Camera Module with Case (Pack of 2)

SKU CH-5CEA-094A5

Two 5 MP Raspberry Pi camera modules with acrylic cases and 15 cm CSI ribbon cables, fixed focus from 1 m to infinity at 30 fps

  • ColorOV5647
  • 5MP resolution captures sharp 1080P video at 30fps
  • 54° horizontal by 41° vertical field of view
  • Fixed focus from 1 metre to infinity suits many projects
  • 15 cm ribbon cable connects directly to 15-pin CSI port
  • Acrylic case included for standing or mounting the module

What this pack delivers

Two 5-megapixel camera modules ship with acrylic cases and 15-centimetre flat ribbon cables. They target makers who need a drop-in replacement for the official Raspberry Pi camera on Pi 5, 4, 3B+, 3B, 2 and Model A/B/B+ boards. Each unit captures 1080p video at up to 30 frames per second. The fixed-focus lens covers one metre to infinity.

Build and daily mounting

Acrylic cases let each module stand on a bench or screw into a project enclosure without extra hardware. The 15-pin CSI ribbon plugs straight into the Pi board, so existing raspicam commands and Python scripts run unchanged. A 54-by-41-degree field of view frames roughly 2.0 by 1.33 metres at two metres distance. Ribbon extensions and Zero-compatible cables are sold separately.

Upgrade path and fit

This pack replaces a single official camera or a worn module in OctoPi, MotionEye or custom surveillance setups. The jump is worth it when you need two identical viewpoints for stereo experiments or redundant printer monitoring. It does not suit buyers who need autofocus, interchangeable lenses or a wider angle than the 35-millimetre equivalent provides.

Poudarki

  • 5MP resolution captures sharp 1080P video at 30fps
  • 54° horizontal by 41° vertical field of view
  • Fixed focus from 1 metre to infinity suits many projects
  • 15 cm ribbon cable connects directly to 15-pin CSI port
  • Acrylic case included for standing or mounting the module

Specifikacije

BrandArducam
Part NumberB0033C
ColorOV5647

Vprašanja o tem izdelku

Does the 15 cm flat ribbon cable with 15-pin MIPI CSI connector fit every Raspberry Pi model listed?

The 15 cm ribbon cable connects directly to the 15-pin MIPI CSI port on Raspberry Pi 5, 4B, 3B+, 3B, 2, and Model A/B/B+ boards.

What mounting options does the included acrylic case provide?

The acrylic case lets the camera stand on a flat surface or be fixed in place with its built-in mounting holes.

How is the camera enabled in Raspberry Pi OS, and what step is often missed?

Enable the camera interface in raspi-config, reboot, then run libcamera-hello to verify; forgetting the reboot is the common mistake.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.