Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

KHACHIMO

KHACHIMO PS-5551-1F Active PFC 4-way 12V 560W power supply

SKU CH-65C1-QCGCA

ATX power supply with active PFC delivering 560 W across four 12 V rails

  • TypeATX
  • Active PFC delivers stable 12V output for reliable system power
  • 560W capacity supports mid-range components with consistent energy delivery
  • ATX form factor fits standard chassis for straightforward installation
  • Four-way connector layout provides flexible cabling options for diverse builds
  • Tested working unit ensures dependable operation from first boot

What this power supply delivers

The KHACHIMO PS-5551-1F is an ATX power supply rated at 560W with Active PFC and a 4-way 12V output design. It is built for desktop systems that need a standard form-factor unit tested as working and described as good quality by the supplier.

Who this suits and who it does not

This unit fits builders assembling or repairing ATX desktops that require a 560W supply with a multi-rail 12V layout. It is not for systems needing higher total wattage, a single 12V rail configuration, or specialised form factors such as SFX or TFX.

Behaviour under sustained load

The Active PFC circuit helps maintain stable input current during continuous operation, while the 4-way 12V distribution spreads the load across multiple rails to reduce per-rail stress. The supplier confirms each unit is test working before dispatch, supporting reliable output over extended sessions.

Poudarki

  • Active PFC delivers stable 12V output for reliable system power
  • 560W capacity supports mid-range components with consistent energy delivery
  • ATX form factor fits standard chassis for straightforward installation
  • Four-way connector layout provides flexible cabling options for diverse builds
  • Tested working unit ensures dependable operation from first boot

Specifikacije

TypeATX

Vprašanja o tem izdelku

What motherboard power connector does the PS-5551-1F require?

The unit is an ATX power supply, so it needs a standard 24-pin ATX motherboard connector and the matching CPU power connector on your board.

Can the 560W PS-5551-1F run an older graphics card that still draws power from the 12V rail?

Yes, the 560W output is delivered on a 12V rail, so legacy GPUs that use 12V power will operate within the supply's capacity.

How can I confirm the PS-5551-1F is delivering power correctly after installation?

The supply is test-working from the factory; after fitting it, check that the system posts and the fan spins, then verify the 12V rail reads close to 12V in BIOS or monitoring software.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.