Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular silver ATX power supply unit with ventilation grille and label showing model numbers

KHACHIMO

KHACHIMO XW6200 Workstation Power Supply DPS-470AB-1A 345642-001

SKU CH-X1QP-NXYMH

ATX power supply tested working for XW6200 workstations

  • TypeATX
  • Tested and confirmed working for reliable operation
  • 470 W ATX power delivery supports demanding workstations
  • Designed for HP XW6200 compatibility
  • Good quality components ensure stable performance

XW6200 Workstation Power Supply

This ATX power supply is built for the XW6200 workstation platform. It carries part numbers DPS-470AB-1A and 345642-001 for exact identification. The unit is supplied new and has been tested to confirm operation. It suits technicians restoring or maintaining compatible workstation systems.

Replaces original XW6200 power supply

This unit directly replaces the factory supply when the original fails or shows instability. The jump is worth it when the workstation will not power on, shuts down under load or reports voltage warnings. It is not for builders adapting the supply to non‑XW6200 chassis or proprietary pinouts. Compatibility with other platforms is not confirmed.

Poudarki

  • Tested and confirmed working for reliable operation
  • 470 W ATX power delivery supports demanding workstations
  • Designed for HP XW6200 compatibility
  • Good quality components ensure stable performance

Specifikacije

TypeATX

Vprašanja o tem izdelku

Does the DPS-470AB-1A use a standard ATX mounting pattern for the XW6200 chassis?

The unit follows the ATX form factor, so it aligns with the standard four-screw mounting pattern used in the XW6200 workstation.

Which power connectors must be seated first during installation to avoid a no-post condition?

Connect the 24-pin ATX main cable and the 4-pin CPU auxiliary cable before any peripheral leads; missing the CPU auxiliary connector is the most common cause of a silent boot failure.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.