BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00269587BTC
Na zalogi
Kingston Technology Corp.
Kingston Technology Corp. KTH-PL421/32G 32GB DDR4 2133 ECC Registered memory upgrade
32 GB DDR4 2133 ECC registered DIMM for HP/Compaq systems, 288-pin 1.20 V module with 2Rx4 organisation
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 32 GB capacity fits demanding server workloads
- DDR4 2133 speed delivers 17000 MB/s bandwidth
- ECC registered design corrects errors for data integrity
- 20 V operation reduces power draw per module
- 288-pin DIMM form factor matches HP/Compaq system slots
System-specific DDR4 module
This 32 GB DDR4 2133 registered DIMM is built for HP and Compaq workstations and servers that require ECC memory. The single-module design adds 32 GB of capacity in one 288-pin slot without mixing ranks.
ECC registered reliability
Error-correcting code and registered signal processing protect data integrity in multi-socket systems and reduce electrical load on the memory controller. The 1.20 V operating voltage matches the DDR4 standard for these platforms.
DDR4 2133 bandwidth ceiling
The PC4 17000 rating sets the maximum transfer rate at 2133 MT/s, so throughput is limited to that speed even if the platform supports faster DDR4. Systems locked to lower memory bus speeds will run this module at the lower frequency.
Poudarki
- 32 GB capacity fits demanding server workloads
- DDR4 2133 speed delivers 17000 MB/s bandwidth
- ECC registered design corrects errors for data integrity
- 20 V operation reduces power draw per module
- 288-pin DIMM form factor matches HP/Compaq system slots
Specifikacije
| Brand | Kingston |
|---|---|
| Model | KTH-PL421/32G |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Compatible System | HP/Compaq |
| Teža pošiljke | 0.45 kg |
| Velikost pošiljke | 152 × 76 × 25 mm |
Vprašanja o tem izdelku
Does the DDR4 2133 (PC4 17000) interface cap at 1.20V for registered ECC modules?
Yes, this registered ECC DIMM operates at the standard DDR4 1.20V while running at 2133 MHz (PC4 17000).
Will the 288-pin 32GB DIMM fit my HP/Compaq system that requires registered memory?
The module uses the standard 288-pin DDR4 DIMM form factor and is specified for HP/Compaq systems needing registered ECC memory.
Do I need to populate specific slots first when installing this 2Rx4 registered module?
Install the DIMM in the slot designated for channel 0 or CPU 0 per your HP/Compaq service guide; registered modules must follow the platform's population rules.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
