Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small spool of translucent flexible filament, 2.85 mm diameter, 0.25 kg

Lay Filaments

Lay Filaments BENDLAY Flex Filament 2.85mm 0.25kg 3D Printers Accessories

SKU CH-2RBE-V8SAK

Flexible, nearly clear 2.85 mm filament with 96A shore hardness prints at 220–245 °C without stress whitening

  • No stress whitening when bent for durable parts
  • Shore hardness 96A gives flexibility without softness
  • Nearly clear prints from extremely translucent filament
  • Low moisture absorption reduces warping versus ABS
  • Prints at 220‑245 °C with ±0.1 mm tolerance

Filament for flexible prints

Lay Filaments BENDLAY is a modified Butadiene filament designed for 3D printers that accept 2.85 mm material. It prints at 220 to 245 degC and produces nearly clear parts with high interlayer adhesion. The spool weighs 0.25 kg and offers a shore hardness of 96A for flexible but not soft results. It suits makers who need bendable, watertight objects without the warping common in ABS.

Thermal behaviour and power

The recommended printing range of 220 to 245 degC keeps extrusion stable on most direct-drive and Bowden systems. BENDLAY absorbs far less moisture from the air than ABS, so warping is significantly reduced during normal use. No heated chamber is required and the material does not exhibit stress whitening when bent. Diameter tolerance of ± 0.1 mm helps maintain consistent flow and nozzle pressure.

Build quality and daily use

The filament remains bendable after printing, enabling functional parts such as thin bottles, squeezable toys, straps or shoe soles. Its translucent finish yields nearly clear prints without post-processing. BENDLAY is described as safe for household, food and medical contact, expanding the range of printable items. It serves as a practical alternative to ABS and soft PLA for users who need durability and flexibility in a single material.

Poudarki

  • No stress whitening when bent for durable parts
  • Shore hardness 96A gives flexibility without softness
  • Nearly clear prints from extremely translucent filament
  • Low moisture absorption reduces warping versus ABS
  • Prints at 220‑245 °C with ±0.1 mm tolerance

Specifikacije

BrandLay Filaments

Vprašanja o tem izdelku

How do I install the 2.85 mm BENDLAY filament and what step causes the most trouble?

Load the spool at 220–245 °C; the common mistake is forcing the flexible filament too fast, which buckles in the Bowden tube.

What maintenance or replacement will the BENDLAY spool need later?

Store the 0.25 kg spool sealed with desiccant; it absorbs far less moisture than ABS, so drying is rarely required.

What limit appears first during a long print with this filament?

The ±0.1 mm diameter tolerance can cause occasional under-extrusion on very long runs before the spool runs out.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.