Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Blue cable with MCIO and SlimSAS connectors, .5 m length

LORDWORLD

LORDWORLD MB403L-B MCIO 4i SFF-TA-1016 to SlimSAS 4i SFF-8654 Cable 0.5m

SKU CH-Q1E8-6GJ0C

Connects MCIO 4i SFF-TA-1016 to SlimSAS 4i SFF-8654 at PCIe 4.0 speeds with locking latches and SFF-9402 compliance

  • 5 m length keeps NVMe cabling tidy inside the chassis
  • PCIe 4.0 transfer speeds match current NVMe controller performance
  • MCIO and SlimSAS locking latches prevent accidental disconnects
  • SFF-9402 compliant design works with mainstream NVMe HBA and RAID cards
  • UL 20744 certified cable meets required safety standards

Connectivity Specifications

The LORDWORLD MB403L-B cable connects an MCIO 4i SFF-TA-1016 host port to a SlimSAS 4i SFF-8654 device port over 0.5 metres. Connectors comply with SFF-TA-1016 and SFF-8654 design specifications. Transfer speeds meet PCIe 4.0 specifications. The SFF-9402 compliant cable design supports mainstream NVMe/Tri-mode HBA/RAID cards.

Builder Suitability

This cable suits builders linking MCIO 4i controllers to SlimSAS 4i backplanes or drives in dense chassis. The locking latch design on both connectors secures the link against vibration. The UL20744 certification confirms the assembly meets safety requirements. Buyers needing longer reach or different connector keying should look elsewhere.

Decisive Specification

The interface pairing is MCIO 4i SFF-TA-1016 to SlimSAS 4i SFF-8654. Verify that the host side exposes an MCIO 4i port and the target side accepts a SlimSAS 4i plug before ordering.

Poudarki

  • 5 m length keeps NVMe cabling tidy inside the chassis
  • PCIe 4.0 transfer speeds match current NVMe controller performance
  • MCIO and SlimSAS locking latches prevent accidental disconnects
  • SFF-9402 compliant design works with mainstream NVMe HBA and RAID cards
  • UL 20744 certified cable meets required safety standards

Specifikacije

BrandLORDWORLD

Vprašanja o tem izdelku

Will the MCIO or SlimSAS locking latches wear out and need replacement?

The locking latches are part of the connector moulding and are rated for the cable's service life; no separate latch replacement is expected.

What limits sustained throughput first — the PCIe 4.0 spec or the SFF-9402 cable design?

Both the connectors and the SFF-9402 compliant cable are specified to meet PCIe 4.0 speeds, so neither interface nor cable should be the first bottleneck.

Does the 0.5 m length or UL 20744 rating affect heat or power draw during all-day NVMe RAID use?

The short 0.5 m run keeps resistive loss minimal, and UL 20744 covers safety compliance; the passive cable adds no active heat or power load.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.