Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Bare PCB dual-output power supply, green board with soldered components and terminal blocks

Mean Well

Mean Well PSC-100A 100.05W 13.8V Dual Output Power Supply

SKU CH-PAMZ-58BR8

Delivers 100.05 W at 13.8 V through dual outputs rated at 14.75 A and 2.5 A for security and alarm systems

  • TypeAT
  • Dual-output design simplifies wiring for security systems
  • 05 W total power supports demanding alarm panels
  • 8 V output matches standard backup-battery voltage
  • Channel 1 delivers 14.75 A for primary loads
  • Channel 2 provides 2.5 A for auxiliary circuits

Security Power Supply

The Mean Well PSC-100A is a bare plate type security power supply designed for installation inside equipment. It delivers a dual output configuration suitable for emergency lighting, security monitoring and alarm systems. The unit provides 13.8V across two channels rated at 14.75A and 2.5A respectively. Total output power reaches 100.05W for continuous operation.

Sustained Load Behaviour

The supply maintains its rated 100.05W output across both channels during continuous operation rather than only in short bursts. Dual channel design allows the 14.75A primary output and 2.5A secondary output to run simultaneously within the combined power envelope. The AT type switching topology supports stable voltage regulation at 13.8V under constant loading conditions typical of security installations.

Interface Limits

The dual output interface provides fixed 13.8V rails with defined current limits of 14.75A and 2.5A per channel. Combined output cannot exceed 100.05W regardless of how load is distributed between channels. Builders needing higher voltage options, additional output channels or power beyond 100.05W must select a different supply architecture. The bare plate format also requires mechanical integration into a host enclosure.

Poudarki

  • Dual-output design simplifies wiring for security systems
  • 05 W total power supports demanding alarm panels
  • 8 V output matches standard backup-battery voltage
  • Channel 1 delivers 14.75 A for primary loads
  • Channel 2 provides 2.5 A for auxiliary circuits

Specifikacije

TypeAT

Vprašanja o tem izdelku

How much heat does the PSC-100A generate when running continuously at 100.05W?

The unit delivers 100.05W total across two 13.8V outputs. Typical efficiency for this class means roughly 12–22.5W becomes heat, so plan for warm airflow around the bare PCB.

What external AC wiring and enclosure must I provide for this bare PCB supply?

You must supply an AC mains cable, a protective earth connection, and a ventilated metal or fire-rated enclosure that meets local safety codes for the 100.05W PCB assembly.

Can the CH1 4.75A and CH2 2.5A outputs charge a 12V 100Ah SLA battery while powering a 13.8V alarm panel?

Yes. The combined 13.8V rails share a common return, so the 4.75A channel can float-charge the battery while the 2.5A channel runs the panel, provided total draw stays under 100.05W.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.