EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Micro Connectors
Four-layer acrylic case stacks multiple Raspberry Pi and Tinker Board units with a 40 mm 5000 RPM fan and heatsinks for active cooling
The Micro Connectors RAS-PCS46 is a four-layer clear acrylic enclosure designed for Raspberry Pi 5, Pi 4, Pi 3, Pi 2, Pi 1, Pi Zero variants and Asus Tinkerboard. Its stackable layout lets makers build compact clusters for edge computing or distributed learning. The open frame keeps every port and header reachable while the boards sit securely on included footpads.
Precision laser-cut acrylic layers align with a 5000 RPM active fan powered through a 2.54mm pin header at 5V. Heatsinks attach directly to the CPU and chipsets to move heat into the forced airflow. The open design leaves the Micro-SD slot, 40-pin GPIO, camera CSI and display DSI fully exposed for HATs, sensors or ribbon cables without disassembly.
Builders moving from individual plastic shells gain a unified 90.9 x 69.6 x 143.6mm tower that scales to four nodes with shared mounting points. The jump makes sense when a project needs coordinated power, networking or cooling across multiple boards. It does not suit users who only ever run a single Pi or who require a fully sealed, dust-proof chassis.
| Brand | Micro Connectors |
|---|---|
| Model | RAS-PCS46 |
| Features | Compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B/B+, Pi Zero/Zero W Active 40mm fan with heatsinks for cooling CPU and chipsets 4-Layer stackable design for Pi Clusters Open frame design for easy access to Micro-SD, 40-pin GPIO, camera CSI, and display DSI Wall mount compatible Specifications: Material: Acrylic Dimension: 90.9 x 69.6 x 143.6mm Fan Size: 40 x 40 x 7mm Fan Speed: 5000 RPM Fan power input: 5V Fan connector: 2.54mm pin |
| Package Contents | Acrylic case, fan, heatsinks, footpads, screws, standoffs and screw nuts |
| Teža pošiljke | 0.29 kg |
| Velikost pošiljke | 99 × 76 × 48 mm |
The 2.54mm pin header plugs directly onto the 5V GPIO pins on the Raspberry Pi or compatible board.
The case measures 90.9mm wide, 69.6mm deep and 143.6mm high when fully assembled.
The fan is secured to the top acrylic layer using the supplied screws and standoffs; the step often missed is connecting the 2.54mm header to the 5V GPIO pins before closing the stack.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
No language matches that.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?