Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Micron 5300 MAX 1.92TB 2.5 inch SATA enterprise SSD

Micron Technology, Inc.

Micron Technology, Inc. MTFDDAK1T9TDT-1AW1ZABYY 5300 MAX 1.92TB 2.5" SATA enterprise SSD

SKU CH-97CT-K22E2 MPN MTFDDAK1T9TDT-1AW1ZABYY

A 1.92TB 2.5-inch SATA enterprise SSD delivering up to 540 MBps read and 520 MBps write for intensive workloads

  • Form Factor2.5"
  • Capacity1.92TB
  • InterfaceSATA III
  • Max Sequential ReadUp to 540 MBps
  • Max Sequential WriteUp to 520 MBps

Options 1.92TB

  • 92 TB capacity stores large enterprise datasets
  • 540 MBps sequential read speeds accelerate data access
  • 520 MBps sequential write speeds sustain heavy write workloads
  • 5 inch form factor fits standard server drive bays
  • SATA III interface integrates with existing SATA infrastructure

Micron 5300 MAX 1.92TB SATA SSD

This Micron 5300 MAX drive provides 1.92TB of capacity in a 2.5 inch form factor with a SATA III interface. It delivers sequential reads up to 540 MBps and writes up to 520 MBps. The unit is sold new in bulk packaging without hardware encryption.

Suits read-heavy server workloads

The 5300 MAX series targets read-intensive enterprise applications such as web serving, content delivery and virtual desktop infrastructure. Its endurance profile is optimised for those patterns. It is not suited for write-heavy databases, logging arrays or workloads that exceed its rated drive writes per day.

Fits standard 2.5 inch SATA bays

The drive slides into any 2.5 inch SATA hot-swap bay or caddy and connects through the standard data and power connectors. It requires a backplane or controller that supports SATA III speeds. Using this drive frees PCIe slots for other expansion cards.

Poudarki

  • 92 TB capacity stores large enterprise datasets
  • 540 MBps sequential read speeds accelerate data access
  • 520 MBps sequential write speeds sustain heavy write workloads
  • 5 inch form factor fits standard server drive bays
  • SATA III interface integrates with existing SATA infrastructure

Specifikacije

BrandMicron
Series5300 MAX
Form Factor2.5"
Capacity1.92TB
InterfaceSATA III
Max Sequential ReadUp to 540 MBps
Max Sequential WriteUp to 520 MBps
Teža pošiljke0.91 kg
Velikost pošiljke178 × 102 × 51 mm

Druge različice tega modela

še 1 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Will this 2.5" SATA III drive fit in my server's existing drive bay?

The drive uses a standard 2.5" form factor and SATA III interface, so it fits any 2.5" SATA hot-swap bay or caddy with the correct backplane connector.

Can I run this 5300 MAX alongside older SATA SSDs in the same array?

Yes, it connects via SATA III and will operate at the speed of the slowest drive in the array; the controller treats it as a standard SATA device.

How do I verify the 540 MBps read and 520 MBps write speeds after installation?

Run a sequential benchmark tool such as CrystalDiskMark or fio against the raw block device and confirm results approach the stated 540 MBps read and 520 MBps write figures.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.