Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular metal ASIC miner, matte grey finish, front grille with dual fans, rear power sockets, about twenty pounds

Mining Syndicate

Mining Syndicate Antminer S19J Pro 104 TH/s 3068 W mining hardware

SKU CH-3NH6-FM6BM

An ASIC miner delivering 104 TH/s for Bitcoin at 3068 W with 220 V power and a 12-month warranty

  • Delivers 104 TH/s for high Bitcoin throughput
  • Consumes 3068 W with ±5 % tolerance
  • Requires 220 V supply for stable operation
  • Weighs approximately 20 pounds for rack mounting
  • Backed by 12-month manufacturer warranty

Antminer S19J Pro Bitcoin ASIC miner

The Antminer S19J Pro is an ASIC miner built for Bitcoin. It delivers a rated 104 TH/s hash rate while drawing 3068 W with a tolerance of minus five percent to plus five percent. The unit weighs about 20 pounds and requires a 220 V outlet for self-hosted operation.

Suited for dedicated Bitcoin miners

This hardware suits operators who can provide a 220 V supply and robust cooling because the machines run very loud and very hot. Buyers without access to 220 V power or adequate airflow should look at other solutions. A small step-down transformer will not work for these units.

104 TH/s at 3068 W defines the efficiency envelope

The single specification that decides fit is the 104 TH/s rating paired with 3068 W power draw. This ratio determines daily energy cost versus Bitcoin output and dictates the cooling and electrical infrastructure you must provision.

Poudarki

  • Delivers 104 TH/s for high Bitcoin throughput
  • Consumes 3068 W with ±5 % tolerance
  • Requires 220 V supply for stable operation
  • Weighs approximately 20 pounds for rack mounting
  • Backed by 12-month manufacturer warranty

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Which Antminer S19J Pro variant should I choose for my operation?

This model is offered as a single 104 TH/s configuration rated at 3068 W, so there are no alternative versions or capacities to select from.

What does the 104 TH/s rating mean when the miner is running in my facility?

It indicates the machine can perform 104 trillion hash calculations per second for Bitcoin mining, with actual output varying within the manufacturer's stated tolerance.

What power interface does the S19J Pro require and what does it limit in practice?

The unit needs a 220 V supply to deliver its rated 3068 W; a standard lower-voltage circuit will not provide enough power for stable operation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.