Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver rectangular AT power supply unit with cooling fan visible on one side measuring 242 by 125 by 65 millimetres

myVolts

myVolts 12V 83.3A 1000W AT Switching Power Supply

SKU CH-TACE-K7PQJ

12 V switching supply delivering 83.3 A for 1000 W loads with overload, overvoltage and short-circuit protection

  • TypeAT
  • Delivers 1000 W continuous power for demanding industrial loads
  • Accepts 85-145 V AC input for flexible worldwide deployment
  • Built-in short-circuit, over-voltage and over-current protection safeguards connected equipment
  • Certified to FCC and CE standards with 100 % full-load burn-in test
  • Operates reliably from -10 °C to +60 °C with ±1 % voltage regulation

Industrial 12V 1000W AT Power Supply

This AT-type switching supply delivers 12V at 83.3A for a rated 1000W output. It accepts 85-145VAC at 50-60Hz and targets industrial equipment, LED installations and monitoring systems that require a single 12V rail.

Sustained load behaviour

Efficiency exceeds 80% and output voltage holds within ±1% under load, with an adjustable ±3% range. Overload, overvoltage, overcurrent and short-circuit protections engage automatically. The unit operates continuously from -10°C to +60°C at 20-90%RH and survives 10-500Hz, 2G vibration for ten minutes per axis.

Installation notes

The chassis measures 242mm by 125mm by 65mm and weighs 1.5kg. An internal cooling fan produces audible airflow noise during operation. Input-to-output isolation is rated at 1.5kVAC, with 0.5kVAC between output and case. The supplier advises keeping total connected load at or below 80% of rated power.

Poudarki

  • Delivers 1000 W continuous power for demanding industrial loads
  • Accepts 85-145 V AC input for flexible worldwide deployment
  • Built-in short-circuit, over-voltage and over-current protection safeguards connected equipment
  • Certified to FCC and CE standards with 100 % full-load burn-in test
  • Operates reliably from -10 °C to +60 °C with ±1 % voltage regulation

Specifikacije

TypeAT

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.