Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Compact 300W AT power module with 24-pin ATX and AUX cables, black PCB

myVolts

myVolts 300W 12V DC AT Power Supply Module 24 Pin

SKU CH-SB3Q-PVS8G

Compact 300W AT power module accepts 12V DC input and delivers full ATX rails via 24-pin cable for mini-ITX or 1U builds

  • TypeAT
  • Safe operation with over-current and short-circuit protection
  • Ready to use with 24-pin ATX plug-and-play cable
  • Stable performance from industrial solid capacitor at high temperatures
  • Fits mini-ITX and 1U cases with compact 154 x 35 x 15 mm board
  • Requires 12 V DC adapter to deliver 300 W output

300W AT Power Module for Compact Builds

This 12V DC input module delivers 300W through a 24-pin ATX connector, targeting mini-ITX and 1U chassis where space is tight. It requires an external 12V adapter capable of up to 25A to operate.

Fits Mini-ITX and 1U Cases

The 154 x 35 x 15mm board slides into small enclosures and frees internal volume by moving the AC-DC conversion outside. Included cables provide 24-pin, 20-pin, AUX and SATA connections for motherboard and drive power.

300W Headroom with 85% Efficiency

At 85% efficiency the module handles typical embedded, HTPC or server loads within its 0-55°C operating range. Systems demanding more than 300W or lacking a suitable 12V external supply will need a different solution.

Poudarki

  • Safe operation with over-current and short-circuit protection
  • Ready to use with 24-pin ATX plug-and-play cable
  • Stable performance from industrial solid capacitor at high temperatures
  • Fits mini-ITX and 1U cases with compact 154 x 35 x 15 mm board
  • Requires 12 V DC adapter to deliver 300 W output

Specifikacije

TypeAT

Vprašanja o tem izdelku

What sustained-load limit does the 12 V DC input hit first?

The module draws up to 25 A at 11.4–12.6 V, so the adapter must supply at least 300 W continuously.

How much heat and noise appear when it runs all day?

No fan is included; the board relies on case airflow and operates at 85 % efficiency within 0–55 °C.

What separate 12 V source must I already own?

A 12 V DC adapter rated for 25 A or more is required; the module does not generate its own input power.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.