Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular aluminium power supply with three-pin plug and output leads

myVolts

myVolts 30W IP67 12V 2.5A Power Supply

SKU CH-8NKF-AVJFJ

Converts 90-265V AC to 12V DC at 2.5A with IP67 waterproof protection for outdoor LED use

  • TypeAT
  • Aluminium housing dissipates heat for stable operation
  • IP67 rating protects against water ingress outdoors
  • Wide 90-265 V AC input suits global mains voltages
  • Delivers 12 V DC at 2.5 A for 30 W LED loads
  • Automatic short-circuit, overload and over-temperature protection with auto-recovery

30W IP67 LED Driver

This 30W IP67 power supply converts 90-265V AC input to 12V DC at 2.5A for LED strips, bulbs and other 12V lighting projects. The aluminium alloy housing provides heat dissipation and full waterproof protection for outdoor installations. It suits installers who need a compact, sealed driver for permanent outdoor or damp-location use.

Sustained-load behaviour

Automatic protection covers short circuit, overload, over voltage, over current and high temperature using hiccup-mode auto-recovery once the fault clears. The metal enclosure maintains stable output during continuous operation without thermal throttling. It is not for buyers who need adjustable voltage or higher wattage for large LED arrays.

Installation notes

The unit includes a 3-prong AC plug for direct mains connection and low-voltage DC output terminals for LED wiring. IP67 sealing means no extra weatherproofing is required, but the fixed cable lengths limit placement flexibility. It is not for builders who need a DIN-rail mount or screw-terminal AC input for enclosure integration.

Poudarki

  • Aluminium housing dissipates heat for stable operation
  • IP67 rating protects against water ingress outdoors
  • Wide 90-265 V AC input suits global mains voltages
  • Delivers 12 V DC at 2.5 A for 30 W LED loads
  • Automatic short-circuit, overload and over-temperature protection with auto-recovery

Specifikacije

TypeAT

Vprašanja o tem izdelku

How much heat does the aluminium housing need to shed when the supply runs at 30W continuously?

The aluminium alloy housing is designed for heat dissipation to maintain stability at the rated 30W output.

What AC mains plug and voltage range must be available on site for the 90-265V input?

A three-prong plug and a mains supply between 90 and 265V AC at 50 or 60Hz are required.

Can the 12V 2.5A output run legacy 12V LED strips that draw less than 30W without triggering protection?

Yes, the hiccup-mode protection only activates on short circuit, overload, over-voltage, over-current or over-temperature, so lighter loads run normally.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.